3HP / 2HP Control Panel, 230V 3-phase, with manual / automatic water level control

(You save US$110.00 )
(1 review)
16.00 LBS
20.00 (in)
10.00 (in)
14.00 (in)
Current Stock:

For use with a submersible deep well water pump. Supports 2HP to 3HP three phase water pumps running on 230V

Features a full automatic mode with water level probes and manual mode.


Model: TCP30T230

  • HP: 2 - 3HP
  • Voltage: 230V 3-Phase input and output
  • Cycle: 60 Hz
  • Overload Protector: included, Maximum Amps adjustable
  • Phase Loss protection: included
  • Water level probes: included
  • Micro Processor Control: yes
  • Housing Material: Steel
  • Knockout for wire: four 3/4"
  • Net weight: 14Lb
  • Shipping Weight: 16 lbs
  • Dimensions/Length:  17-1/2" x 12-1/4" x 7"  


More details:

* Steel Casing w/ lock and keys

* Manual mode controlling the motor On/Off without using the probes

* Also can be used with non-water-pump motors in manual mode

* Automatic mode is for controlling water pumps only

* Automatically controlling the motor by the probes' signal according to the water level in the well or in the cistern, or by other pilot device if used. 

* Connection Terminals accept up to #4 AWG wire

* 3 Phase magnet relay switch

* Built-in overload protection with fine turn

* Phase loss protection (Automatic mode only)

* Voltage, Amperage meters. Working status LED indicators

* For indoor and under cover mounting



1 year


  • 5
    Arrived quick. Easy to install and I'm NOTan electrician! Only one small glitch in the beginning (phase lost alert) but it worked itself out. Water level sensors all work great. My system is now automatic! I would highly recommend this setup for any

    Posted by George Bordi on 5th Sep 2022

    Works great