3HP 130GPM Max Centrifugal Pump for General Water Transfer - Open Flow, Aeroponics, Drip Irrigation

(You save US$166.00 )
(1 review) Write a Review
70.00 LBS
Current Stock:

3HP Centrifugal Pump for General Water Transfer - Open Flow, Aeroponics and Drip Irrigation


Tuhorse's above ground centrifugal THC130-80 pumps are extremely high flow rate water pumps for moderate pressure and head applications. Offering a maximum flow rate of 130GPM,
the THC130-80 is excellent high flow water pump for open flow systems, drip irrigation, or as an aeroponic water pump.


  • Model: THC130-80
  • HP: 3HP
  • Voltage: 230V, single phase
  • Cycle: 60 Hz
  • Operating Amperage: 9.6A
  • Motor RPM: 3450 RPM
  • Stages: 1
  • Maximum Flow: 130 GPM
  • Maximum Head: 85ft (36 psi)
  • Maximum suction: 22 ft
  • Typical Flow: 
  • Suction Port: 2 inch
  • Discharge Port: 2 inch
  • Built-in Check-valve: n/a
  • Housing Material: Cast iron
  • Impeller Material: Brass 
  • Motor Enclosure: TEFC (Totally Enclosed, Fan Cooled)
  • Duty: Continuous duty
  • Weight: 67lbs
  • Dimensions/LxWxH: 18"x9.5"x13" (46cm x 24cm x 33cm)
  • Shipping Dimensions: 19.5"x11"x14.5" (50cm x 28cm x 37cm)
  • Shipping Weight: 70Lbs  (32Kg)


  • 5
    Nice pump

    Posted by verified buyer on 6th Oct 2017

    I use this pump to supply water to my SuperFlow Engine dyno. Has worked without problems to engines running over 800 HP.