3HP 150GPM Max Centrifugal Pump for General Water Transfer - Open Flow, Drip Irrigation

(You save US$136.00 )
(1 review)
70.00 LBS
Current Stock:
Adding to cart… The item has been added

3HP Centrifugal Pump for General Water Transfer - Open Flow, Aeroponics and Drip Irrigation


Tuhorse's above ground centrifugal THC130-80 pumps are high flow rate water pumps for low or moderate pressure and head applications. The THC130-80 is an excellent high flow water pump for open flow systems, drip irrigation, or as an low pressure aeroponic water pump.


  • Model: THC130-80
  • HP: 3HP
  • Voltage: 230V, single phase
  • Cycle: 60 Hz
  • Operating Amperage: 9.6A
  • Motor RPM: 3450 RPM
  • Stages: 1
  • Maximum Suction: 20ft.
  • Maximum Head(cut off): 78ft. (or 33PSI)
  • Maximum Flow(0 - 10ft.): 150GPM
  • Free Flow Rate:  130GPM @ 33ft ; 105GPM @ 50ft ; 83GPM @ 65ft ; 52GPM @ 72ft ; 20GPM @ 76ft.
  • Suction Port: 2 inch
  • Discharge Port: 2 inch
  • Built-in Check-valve: n/a
  • Housing Material: Cast iron
  • Impeller Material: Brass 
  • Motor Enclosure: TEFC (Totally Enclosed, Fan Cooled)
  • Duty: Continuous duty
  • Weight: 67lbs
  • Dimensions/LxWxH: 18"x9.5"x13" (46cm x 24cm x 33cm)
  • Shipping Dimensions: 19.5"x11"x14.5" (50cm x 28cm x 37cm)
  • Shipping Weight: 70Lbs  (32Kg)


  • 5
    Nice pump

    Posted by verified buyer on 6th Oct 2017

    I use this pump to supply water to my SuperFlow Engine dyno. Has worked without problems to engines running over 800 HP.