2HP Centrifugal Pump for General Pumping, Open Flow, Aeroponics Irrigation
Tuhorse THC120-65 centrifugal pump is a high flow rate water pump for moderate pressure and head applications. Offering a maximum flow rate of 120GPM,
the THC120-65 is excellent using in water moving, open flow pumping and where requires high flow such as filling water to a pond, suplying water to a aeroponics system.
Note: Do NOT use this pump for a sprinkler system that requires 30psi and higher pressure. Check out our Tuhorse TH2C47-160 pump that often to be used for a sprinkler system
- Model: THC120-65
- HP: 2HP
- Voltage: 230V
- Cycle: 60 Hz
- Operating Amperage: 8.6A
- Motor RPM: 3450 RPM
- Stages: 1
- Maximum Flow: 120 GPM
- Maximum Head: 72 ft (30psi)
- Maximum Suction: 22 ft
- Typical Flow:
- Suction Port: 2 inch
- Discharge Port: 2 inch
- Built-in Check-valve: n/a
- Housing Material: Cast Iron
- Impeller Material: Brass
- Motor Enclosure: TEFC (Totally Enclosed, Fan Cooled)
- Duty: Continuous duty
- Shipping Weight: 53 lbs
- Dimensions/LxWxH: 14.5"x8"x10 1/4" (37cm x 20.3cm x 26cm)
- Packing Dimensions: 16.5"x9.5"x11.5" (42cm x 24cm x 29cm)