For use with a submersible deep well water pump. Supports 10HP three phase water pumps running on 230V.
Note: This unit does not work with 208V. User can purchase a 208V relay in the same order, we can configure the unit for using with 208V.
Features a full automatic mode with water level probes and manual mode.
* Steel Casing w/ lock and keys
* Manual mode controlling the motor On/Off without using the probes
* Can be used with non-water-pump motors in manual mode
* Automatic mode is for controling water pumps only
* Automatically controlling the motor by the probes' signal according to the water level in the well or in the cistern, or by a pilot device if used.
* Connection Terminals accept up to #4 AWG wire
* 3 Phase magnet relay switch
* Built-in overload protection with fine turn
* Loss phase protection
* Voltage, Amperage meters. Working status LED indicators
* For indoor and under cover mounting