20HP TS6-260-05 230V 3-Phase, Pump-end and Motor w/ Stainless Steel Impellers

(You save US$1,482.00 )
(No reviews yet) Write a Review
209.00 LBS

 Complete pump end and motor set. Control box (control panel) is not mandatory, but a three phase power switch with overload protection is required.


  • HP: 20HP
  • Voltage: 230V Three Phase
  • Cycle: 60 Hz
  • Operating Amperage: 57A
  • Motor RPM: 3450 RPM
  • Stages: 5
  • Maximum Head (cut off): 340 ft.
  • Maximum Flow( 0-140ft.): 370 GPM
  • Rated Flow: 260GPM
  • Free Flow Rate: 350GPM @ 170ft; 300GPM @ 210ft; 260GPM @ 240ft; 200GPM @ 280 ft; 150GPM @ 300ft.
  • Suction Port: Center Suction
  • Discharge Port: 3 inch NPT Female (4" is available, customer must notice us before shipping)
  • Built-in Check-valve: Yes
  • Housing Material: Stainless Steel 304
  • Impeller Material: stainless steel 304
  • Motor Enclosure: Stainless steel 304
  • Discharge and Suction Port Material:  Stainless Steel 304
  • Duty: Continuous or allow maximum 15 restarting cycles / hour
  • Motor Bearing / Lubrication:  Water lubricated thrust bearing, water filled lubrication
  • Control Box: Three phase power switch with overload protection is required(not included)
  • Net Weight: 199 lbs
  • Shipping weight: 209 Lbs
  • Dimensions/Length(pump and motor assembly): 
  • Shipping Dimensions: Motor and pump separately packed


Minimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector / Circuit breaker. The protector / breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector / breaker or a protection device that does not cause phase loss (missing phase) problem.

Not exactly as shown in photos due to stages and HP vary from models. Photos are taken from one of the 10HP for illustrations only.

 Shipping information:

Due to the motor's weight is over the 150Lb limit set by regular courier services, this item will be delivered by UPS LTL Freight service. Subject to surcharge if buyer is (1) in rural area, (2)without a forklift truck or unable to help for unloading, (3) requires appointment, (4)Home delivery. Buyer can ask for delivering to your closest UPS Freight center for pick up to avoid the surcharges. 

Please allow 2 days handling time. This item ship to 48 USA continental states and Canada only. Travelling time is 2-8 business days.

The shipping weight is around 195Lb including packing and the pallet. The motor is 163 Lb. Two person lift is required for unloading if a forklift truck is unavailable.

1 Year