10HP TS6-200-03A 230V 3-Phase, Pump-end and Motor w/ Stainless Steel Impellers
Complete pump end and motor set. Control box (control panel) is not mandatory, but a three phase power switch with overload protection is required.
Minimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector / Circuit breaker. The protector / breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector / breaker or a protection device that does not cause phase loss (missing phase) problem.
* Not exactly as shown in photos due to stages and HP vary from models. Photos are taken from one of the 10HP for illustrations only.
Due to the motor's weight is over the 150Lb limit set by regular courier services, this item will be delivered by UPS LTL Freight service. Subject to surcharge if buyer is (1) in rural area, (2)without a forklift truck or no person available to help unloading, (3) requires appointment, (4)Home delivery. Buyer can ask for delivering to your closest UPS Freight center for pick up to avoid the surcharges.
Please allow 2 days handling time. This item ship to 48 USA continental states and Canada only. Travelling time is 2-8 business days.
Two person lift is required for unloading if a forklift truck is unavailable.