5.5HP TH4-023-20 460V 3Ph. Pump-end and Motor
Tuhorse
US$735.00
US$1,360.00
(You save
US$625.00
)
(No reviews yet)
Write a Review
Tuhorse
5.5HP TH4-023-20 460V 3Ph. Pump-end and Motor
Complete pump end and motor set. Control box (control panel) is not mandatory, but a three phase power switch with overload protection is required. Complete Instructions.
- HP: 5.5HP
- Voltage: 460V Three Phase
- Cycle: 60 Hz
- Operating Amperage: 8.6 A
- Motor RPM: 3450 RPM
- Stages: 20
- Maximum Flow: 30 GPM
- Maximum Head: 610 ft
- Typical Flow: 27GPM @ 420ft; 23GPM @ 500ft; 20GPM @ 580ft; 15GPM @ 650ft.
- Suction Port: Center Suction
- Discharge Port: 1.5 in
- Built-in Check-valve: Yes
- Housing Material: Stainless Steel
- Impeller Material: Thermal Plastic
- Motor Enclosure: Stainless steel
- Duty: Continuous or up to 30 restarting cycles / hour
- Control Box: Three phase power switch with overload protection is required.
- Weight: 61.6 lbs
- Dimensions/Length: 57"
Minimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector / Circuit breaker. The protector / breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector / breaker or a protection device that does not cause missing phase problem.
1 Year
