Pump end only. Requires appropriate horse power motor and corresponding control box( if necessary) for operation.
This Tuhorse Pump-End is Adaptable (compatible) to those major brand motors with same HP rating or larger, Such as Franklin Electric 4" Submersible Motor for Deep Well Pump. NEMA standartd.
Please note: This model is for FREE FLOW or LOW PRESSURE applications.
- HP: Requires 3HP
- Voltage: N/A
- Cycle: N/A
- Operating Amperage: N/A
- Motor RPM: 3450 RPM
- Stages: 4
- Maximum Flow (0 - 30ft): 120GPM
- Maximum Head (cut off head): 115ft
- Typical Flow: 100GPM @ 50 ft; 90GPM @ 65 ft; 70GPM @ 75ft; 40GPM @ 92 ft.
- Suction Port: Center Suction
- Discharge Port: 2 in
- Built-in Check-valve: Yes
- Housing Material: Stainless Steel
- Impeller Material: Thermal Plastic
- Motor Enclosure: n/a
- Duty: n/a
- Control Box: n/a
- Weight: 15 lbs
- Dimensions/Length: n/a