3HP TH4-090-04 460V 3-Phase. Pump-end and motor

Tuhorse

SKU:

TH409004T460

US$575.00

US$960.00

(You save US$385.00 )

(No reviews yet) Write a Review

Weight:

46.60 LBS

Width:

38.60 (in)

Height:

11.00 (in)

Depth:

7.50 (in)

Condition:

New

Please note: This model is for FREE FLOW or LOW TDH applications.

90GPM rated, 120GPM Max.

Complete pump end, and motor. Complete Instructions.

HP: 3HP
Voltage: 460V Three Phase
Cycle: 60 Hz
Operating Amperage: 4.6A
Motor RPM: 3450 RPM
Stages: 4
Maximum Head(cut off): 120 ft.
Maximum Flow: 120 GPM
Free Flow Rates: 100GPM @ 50ft; 90GPM @ 65ft; 75GPM @ 75ft; 40GPM @ 92ft
Suction Port: Center Suction
Discharge Port: 2 in
Built-in Check-valve: Yes
Housing Material: Stainless Steel, Grade 304
Impeller Material: Thermal Plastic
Motor Enclosure: Stainless steel, Grade 304
Duty: Continuous or up to 30 restarting cycles / hour
Control Box: Three phase power switch with overload protection is required
Weight: 46.6 lbs.
Dimensions/Length: 40"

Note: We recommend you to use our TDH calculator in selecting a pump for your application

Minimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector / Circuit breaker. The protector / breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector / breaker or a protection device that does not cause phase lose problem.

1 Year