6" Submersible pump, stainless steel wet-end and motor, water filled cooling

20HP TS6-200-06A 460V 3-Phase Set with Stainless Steel Pump-end and Cast Iron Base Motor

Tuhorse
SKU:
TS620006T460A
CAD$3,318.30
CAD$4,981.50
(You save CAD$1,663.20 )
(No reviews yet)
Weight:
191.00 LBS
Condition:
New
Current Stock:
Adding to cart… The item has been added
Description

Complete pump end and motor set. Control box (control panel) is not mandatory, but a three phase power switch with overload protection is required.

 

  • HP: 20HP
  • Voltage: 460V Three Phase
  • Cycle: 60 Hz
  • Operating Amperage: 26.2A
  • Motor RPM: 3450 RPM
  • Stages: 6
  • Maximum Head (cut off): 400 ft.
  • Rated Flow: 200GPM
  • Maximum Flow( 0-210 ft.): 290 GPM
  • Free Flow Rate: 240GPM @ 250ft; 200GPM @ 280ft; 180GPM @ 300ft; 150GPM @ 325 ft; 120GPM @ 345ft.
  • Suction Port: Center Suction
  • Discharge Port: 4 inch NPT Female (4" to 3" NPT adapter sold separately if needed)
  • Built-in Check-valve: Yes
  • Housing Material: Stainless Steel 304
  • Impeller Material: stainless steel 304
  • Motor Body and Top: Stainless steel 304
  • Motor Base: Cast Iron
  • Discharge and Suction Port Material:  Stainless Steel 304
  • Motor Bearing / Lubrication:  Ball bearing, Oil filled lubrication
  • Duty: Continuous or allow maximum 15 restarting cycles / hour
  • Control Box: A three-phase power switch with overload protection is required (not included). Our 20 HP, 3-phase, 460V control panel is fully compatible.
  • Net Weight: 180 lbs.
  • Shipping weight: 41+150 Lbs.
  • Dimensions/Length(pump and motor assembly): not have measured
  • Shipping Dimensions: Motor and pump separately packed. Shipping Price will be quoted by UPS 2-3 days service.

 

Minimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector / Circuit breaker. The protector / breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector / breaker or a protection device that does not cause phase loss (missing phase) problem.

* Not exactly as shown in photos due to stages and HP vary from models. Photos are taken from one of the 10HP for illustrations only.

Shipping information:

Please allow 1 days handling time. This item ship to 48 USA continental states and Canada only.

The motor is 150 Lb. Two person lift is required for unloading if a forklift truck is unavailable. Please help the driver to unload the packages.

 

Warranty
1 Year