13GPM, 530ft Max(cut off) TDH, for open flow applications
2200 Watts (3HP) Stainless Steel Impellers Deep Well Pump and Control Box (4THS13C220V2200P8)
8 x 400 Watts mono crystalline A-grade solar panel
Solar motor -- permanent magnetic, brushless, 3-phase
13GPM Rated S.S. Pump-end(013-18)
Automatic control box -- 3-phase output, DC or AC single phase input
250 feet 12/3 submersible pump cable
2 x water level sensor for setting up automatic pumping
2 x 10 ft. MC4 cable w/ M-F connectors, for connecting solar panel to control box
Heat shrink splice kits for watertight connection(1 for under water, 1 for ground level)
Installation guide
2-year warranty
Performance using 8 x 400W Solar panels
| Production based on 8 hours peak sun daily | ||
| Head (ft.) | Gallon / min | Gallon / day |
| 450 ft. | 6 Gal. | 2880 Gal |
| 400 ft. | 9 Gal | 4320 Gal |
| 350 ft. | 13 Gal | 6240 Gal |
| 0-290 ft. | 16 Gal | 7680Gal |
4THS13C220V2200 Solar Water Pump Specifications:
Fit 4" inside diameter and larger well
2200W / 3HP, 220V-330VDC nominal operating power or AC 240V
1.25" NPTF discharge (outlet)
13GPM rated, 16GPM Max.
18 Stages stainless steel impellers design
Pump Diameter, length: 4" x 37"
Pump Net weight: 34Lb, excluding control box
Package Weight: 65Lb, including control box
Soft start, DC solar power/AC power converted to 3-phase to power the pump motor
Permanent magnetic motor rotor, brushless
Auto control box specifications:
Optimize pumping efficiency with MPPT according to sunlight condition and solar panel used
Fully automatic pumping mode using water level sensor(s)
Bypass sensors for application that does not require water level monitoring
Low power protection, overload protection
Dry run protection in automatic mode
Maximum solar input withstand Voc = / < 400V (solar panel array open circuit voltage)
Maximum AC input 240V
Maximum input current 12.5 amps
Tuhorse
Tuhorse
Tuhorse
Tuhorse
