Splice Kit for pump wire AWG 6, Submersible, 3M™ tubes
#6 splice kit with outer sleeve (Full Kit)
#6 deep well pump flat cable splice kit comes with a 1.1" x 12" black outer sleeve, 4 x butt connectors and 4 x 3M™ clear dual wall heat shrink tubing that are suitable for connecting #6 wires . The tubing used in these kits was developed especially for groundwater applications. The inner wall of a special thermoplastic adhesive melts and flows when heat is applied. The tubing rapidly shrinks to a skin-tight fit, forcing the melted adhesive to flow and cover the substrate. Upon cooling the adhesive solidifies, forming a permanent flexible, waterproof barrier. The clear tubing allows the additional advantage of seeing inside the splice.
Ideally using for connecting the jacketed ( flat or round ) cable for a submersible deep well water pump and other water tight applications.
Instructions come with the kit. Made in USA
product easy to use. Easy to tell if it was sealing with the compound extruding past the ends will order again.