Splice Kit (Full Kit with 12"x1.1" outer tube) for pump wire, AWG #10 #12 #14, Submersible
Tuhorse
#8 splice kit with outer sleeve (Full Kit)
#8 deep well pump flat cable splice kit comes with a 1.1" x 12" black outer sleeve, 4 x butt connectors and 4 x 3M™ clear dual wall heat shrink tubing that are suitable for connecting #8 wires . The tubing used in these kits was developed especially for groundwater applications. The inner wall of a special thermoplastic adhesive melts and flows when heat is applied. The tubing rapidly shrinks to a skin-tight fit, forcing the melted adhesive to flow and cover the substrate. Upon cooling the adhesive solidifies, forming a permanent flexible, waterproof barrier. The clear tubing allows the additional advantage of seeing inside the splice.
Ideally using for connecting the jacketed ( flat or round ) cable for a submersible deep well water pump and other water tight applications.
Instructions come with the kit.
Made in the USA