3" 3/4 HP TH3-010-14, pump-end only

Pump end only. Requires appropriate horse power 3" motor and corresponding control box for operation.

Model: TH3-010-14e

• Fit 3 inch and larger ID well
• HP: requires 3/4HP motor
• Voltage: n/a
• Cycle: 60 Hz
• Operating Amperage: n/a
• Motor RPM: 3420 RPM
• Stages: 15
• Rated Flow: 8 GPM
• Maximum Flow: 14 GPM
• Maximum Head: 220 ft
• Typical Flow: 13.2GPM @ 105ft; 10.6GPM @ 141ft; 7.9GPM @ 167ft; 5GPM @ 190ft
• Suction Port: Center Suction
• Discharge Port: 1 inch NPT
• Built-in Check-valve: Yes, but an external check valve is required in water tight system
• Housing Material: Stainless Steel 304
• Impeller Material: Thermal Plastic
• Motor Enclosure: Stainless steel 304
• Motor lead: 4 wires (3 wire + 1 ground)
• Duty: Continuous or up to 30 restarting cycles / hour
• Control Box: sold separately
• Weight: 9 lbs
• Packing weight with control box: 9lbs
• Dimensions/Length: 

This TH3-010-14e pump-end is formerly our TH3-T-15e. The pump curve remains the same because they are the same pump. We are in the process changing the model name to reflect the flow rate. 010 stands for 10GPM. The new model numbers help our customers to choose the right pump easier.