Pump end only. Requires appropriate horse power motor and corresponding control box( if necessary) for operation.
This Tuhorse Pump-End is Adaptable (compatible) to those major brand motors with same HP rating or larger, Such as Franklin Electric 6" Submersible Motor for Deep Well Pump. NEMA standartd.
- HP: Requires 10HP
- Voltage: N/A
- Cycle: N/A
- Operating Amperage: N/A
- Motor RPM: 3450 RPM
- Stages: 6
- Rated Flow: 70GPM
- Maximum Flow: 88 GPM
- Maximum Head: 453 ft
- Typical Flow: 79GPM @ 267ft; 62GPM @ 350ft; 40GPM @ 410ft
- Suction Port: Center Suction
- Discharge Port: 2.5" NPTF
- Built-in Check-valve: Yes
- Housing Material: Stainless Steel
- Impeller Material: Thermal Plastic
- Motor Enclosure: n/a
- Duty: n/a
- Control Box: n/a
- Weight: 36.74 lbs
- Dimensions/Length: 24.5"