10HP TH6-070-06 230V 3-Phase. Pump-end and Motor

Tuhorse
SKU:
TH607006T230
US$1,387.00
US$2,280.00
(You save US$893.00 )
(No reviews yet)
Weight:
112.20 LBS
Width:
30.00 (in)
Height:
16.00 (in)
Depth:
9.00 (in)
Condition:
New
Current Stock:
Adding to cart… The item has been added

Complete pump end and motor set. Complete Instructions. Control Panel sold separately.

 

  • HP: 10HP
  • Voltage: 230V Three Phase
  • Cycle: 60 Hz
  • Operating Amperage: 26.4 A
  • Motor RPM: 3450 RPM
  • Stages: 6
  • Rated Flow: 70GPM
  • Maximum Flow: 88 GPM
  • Maximum Head: 450 ft
  • Typical Flow: 79GPM @ 267ft; 62GPM @ 350ft; 40GPM @ 410ft
  • Suction Port: Center Suction
  • Discharge Port: 2.5 inch NPTF
  • Built-in Check-valve: Yes
  • Housing Material: Stainless Steel
  • Impeller Material: Thermal Plastic
  • Motor Enclosure: Stainless steel
  • Duty: Continuous or up to 20 restarting cycles / hour
  • Control Box: Control Box (Control Panel) Optional
  • Weight: 112.2 lbs
  • Dimensions/Length: 49.75"

If you do not purchase a Tuhorse Control Panel for this pump, below is the mimimum requirement for operating and protecting the pump.

Minimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector / Circuit breaker. The protector / breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use 3 x 1-Phase breakers, You must use a real 3-phase breaker that do not cause phase loss problem.

 

1 Year