20HP TS6-130-10 230V 3-Phase, Pump-end and Motor w/ Stainless Steel Impellers

SKU:
TS613010T230
US$2,288.00
US$3,780.00
(You save US$1,492.00 )
(No reviews yet) Write a Review
Weight:
216.00 LBS
Condition:
New
Current Stock:

 Complete pump end and motor set. Control box (control panel) is not mandatory, but a three phase power switch with overload protection is required.

 

  • HP: 20HP
  • Voltage: 230V Three Phase
  • Cycle: 60 Hz
  • Operating Amperage: 57A
  • Motor RPM: 3450 RPM
  • Stages: 10
  • Maximum Head (cut off): 650 ft
  • Rated Flow: 150GPM
  • Maximum Flow( 0-200 ft.): 220 GPM
  • Free Flow Rate: 180GPM @ 320ft; 150GPM @ 430ft; 130GPM @ 490ft; 100GPM @ 550 ft; 70GPM @ 590ft.
  • Suction Port: Center Suction
  • Discharge Port: 3 inch NPT Female
  • Built-in Check-valve: Yes
  • Housing Material: Stainless Steel 304
  • Impeller Material: stainless steel 304
  • Motor Enclosure: Stainless steel 304
  • Discharge and Suction Port Material:  Stainless Steel 304
  • Motor Bearing / Lubrication:  Water lubricated thrust bearing, water filled lubrication
  • Duty: Continuous or allow maximum 15 restarting cycles / hour
  • Control Box: Three phase power switch with overload protection is required(not included)
  • Net Weight: 53+163 lbs
  • Shipping weight: 236 Lbs
  • Dimensions/Length(pump and motor assembly): 
  • Shipping Dimensions: Motor and pump separately packed

 

Minimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector / Circuit breaker. The protector / breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector / breaker or a protection device that does not cause phase loss (missing phase) problem.

Not exactly as shown in photos due to stages and HP vary from models. Photos are taken from one of the 10HP for illustrations only.

 Shipping information:

  Due to the motor's weight is over the 150Lb limit set by regular courier services, this item will be delivered by UPS LTL Freight service. Subject to surcharge if buyer is (1) in rural area, (2)without a forklift truck or no person available to help unloading, (3) requires appointment, (4)Home delivery. Buyer can ask for delivering to your closest UPS Freight center for pick up to avoid the surcharges. 

      Please allow 2 days handling time. This item ship to 48 USA continental states and Canada only. Travelling time is 2-8 business days.

     Two person lift is required for unloading if a forklift truck is unavailable.

1 Year