5HP TS4-075-08 230V 1-Phase. S.S. Pump-end and motor (Control Box Sold Separately)

US$1,538.00 US$789.00
(2 reviews)
58.00 LBS
38.60 (in)
11.00 (in)
7.50 (in)
Current Stock:

Stainless steel pump and motor with S.S. impellers

75GPM rated, 100GPM Max.

Complete pump end, and motor. Complete Instructions. 

  • HP: 5HP
  • Voltage: 230V Single Phase
  • Cycle: 60 Hz
  • Operating Amperage: 23A
  • Motor RPM: 3450 RPM
  • Stages: 8
  • Maximum Head(cut off): 270 ft.
  • Maximum Flow (0 - 60ft.): 100 GPM
  • Free Flow Rates: 90GPM @ 120ft; 80GPM @ 150ft; 60GPM @ 200ft; 50GPM @ 220ft.
  • Suction Port: Center Suction
  • Discharge Port: 2 in
  • Built-in Check-valve: Yes
  • Housing Material: Stainless Steel, Grade 304
  • Impeller Material: Stainless Steel, Grade 304
  • Motor Enclosure: Stainless steel, Grade 304
  • Duty: Continuous or up to 20 restarting cycles / hour
  • Control Box: Required but Sold separately
  • Weight: 58 lbs.
  • Dimensions/Length: 43"


*Control box sold separately

Note: We recommend you to use our TDH calculator to select a pump for your application

1 Year


  • 5
    5hp pump and motor

    Posted by Kenny prejean on 30th Oct 2022

    Great deal, very quick shipping. Pump and motor working great. Ran them for 2 weeks 24/7 to fill my crawfish pond, no problems at all, works better than 5hp pump and motor it replaced.

  • 2

    Posted by Rodney Landry on 30th Jul 2022

    The wire on the pump was cut 6 inch’s from the pump beyond repair . seller comment: If the motor did not burn out, the wire can be repaired. 6" wire is long enough to use a splice kit to fix it. The pump wire come with double jackets. The outer jacket can be removed to fix the individual wire using a splice kit or just the heat shrink tube. Without the outer jack, the wire is still as safe as the other pumps that come with single jacket wire.