5HP TH4-045-12 230V 1-Phase, Pump-end and Motor. (Control Box Sold Separately)

US$1,380.00 US$749.00
(No reviews yet)
57.00 LBS
38.60 (in)
11.00 (in)
7.50 (in)
Current Stock:
Adding to cart… The item has been added

This 4" medium high flow well pump provides the necessary flow and required pressure meet many application's need in irrigation and community water. It can pump 35 to 50GPM with Total Dynamic Head (TDH) range between 320 feet to 200 feet. For using with a sprinkler system, please refer to the nozzle pressure vs flow data and use our TDH Calculator to determine if this pump fits your application. 

  • HP: 5HP
  • Voltage: 230V 1-phase
  • Cycle: 60 Hz
  • Operating Amperage: 23 A
  • Motor RPM: 3450 RPM
  • Stages: 12
  • Maximum Head(Cut Off): 426 ft
  • Rated Flow: 45GPM
  • Maximum Flow(0-180 feet): 53 GPM
  • Open Flow vs Depth: 26GPM @ 357ft; 37GPM @ 314ft; 45GPM @ 250ft; 50GPM @ 210ft
  • Suction Port: Center Suction
  • Discharge Port: 2 in
  • Built-in Check-valve: Yes, external check valve required if pressure tank used
  • Pump Housing Material: Stainless Steel, brass
  • Discharge and Suction Port Material: Brass
  • Impeller Material: Thermal Plastic
  • Motor Enclosure: Stainless steel 304
  • Motor Bearing / Lubrication: Ball bearing, oil filled lubrication
  • Motor lead: 4 wires (3 wire + 1 ground)
  • Duty: Continuous or up to 20 restarting cycles / hour
  • Control Box: NOT Included, Deluxe Box is required and sold separately. Find it here
  • Net Weight: 61 lbs
  • Dimensions/Length: 63"
  • Shipping Weight: 67 lbs



1 Year