3HP TH4-090-04 230V 1-Phase. Complete pump-end, motor, control box pro set

US$1,028.00 US$589.00
(1 review)
50.60 LBS
38.60 (in)
11.00 (in)
7.50 (in)
Current Stock:
Adding to cart… The item has been added

90GPM rated, 120GPM Max.

Complete pump end, motor, and dual capacitor control box set. Complete Instructions.

 Note: This pump is suggested for free flow, low head or low pressure application, due to its low pressure and high flow features. 

  • HP: 3HP
  • Voltage: 230V Single Phase
  • Cycle: 60 Hz
  • Operating Amperage: 13.6 A
  • Motor RPM: 3450 RPM
  • Stages: 4
  • Maximum Head(cut off): 115 ft.
  • Maximum Flow: 120 GPM
  • Free Flow Rates: 100GPM @ 50ft; 90GPM @ 65ft; 70GPM @ 75ft; 40GPM @ 92ft
  • Suction Port: Center Suction
  • Discharge Port: 2 in
  • Built-in Check-valve: Yes
  • Housing Material: Stainless Steel, Grade 304
  • Impeller Material: Thermal Plastic
  • Motor Enclosure: Stainless steel, Grade 304
  • Duty: Continuous or up to 30 restarting cycles / hour
  • Control Box: dual capacitor control box
  • Weight: 50.6 lbs.
  • Dimensions/Length: 40"

Note: We recommend you to use our TDH calculator in selecting a pump for your application

1 Year


  • 5
    Exceeded expectations

    Posted by Brian Staats on 22nd Jun 2019

    I have purchased two of these pumps. They were shipped as promised. Had what was needed to get them installed. One has been running solid for two and a half months for a dewatering well without issues. The second pump has been running 45 days. Seems like a very good value