30HP TS6-260-08A 460V 3-Phase, Pump-end and Oil-Filled Motor, Stainless Steel Impellers

Complete pump end and motor set. Control box (control panel) is not mandatory, but a three phase power switch with overload protection is required.

• HP: 30HP
• Voltage: 460V Three Phase
• Cycle: 60 Hz
• Operating Amperage: 35.4A
• Motor RPM: 3450 RPM
• Stages: 8
• Maximum Head (cut off): 475 ft.
• Maximum Flow( 0-210): 370 GPM
• Rated Flow: 260GPM
• Free Flow Rate: 350GPM @ 240ft; 300GPM @ 300ft; 260GPM @ 340ft; 200GPM @ 390 ft; 150GPM @ 425ft.
• Suction Port: Center Suction
• Discharge Port: 4 inch NPT Female (4" to 3" NPT reducer sold separately if needed)
• Built-in Check-valve: Yes
• Housing Material: Stainless Steel 304
• Impeller Material: stainless steel 304
• Motor Body and Top: Stainless steel 304 
• Motor Base: Cast Iron
• Discharge and Suction Port Material:  Stainless Steel 304
• Motor Bearing / Lubrication: Ball bearing, Oil filled lubrication
• Duty: Continuous or allow maximum 15 restarting cycles / hour
• Control Box: Three phase power switch with overload protection is required(not included)
• Net Weight: 210 lbs
• Shipping weight: 270 Lbs (ship with LTL Freight only, see detail) 
• Dimensions/Length(pump and motor assembly): 86" (215cm)

Minimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector / Circuit breaker. The protector / breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector / breaker or a protection device that does not cause phase loss (missing phase) problem.

* Not exactly as shown in photos due to stage and HP vary from model to model. Photos are taken from one of the 10HP for illustrations only.

Shipping information:

     Due to the weight is over the 150Lb limit set by regular courier services, this item will be delivered by LTL Freight service. Subject to surcharge if buyer is (1) in rural area, (2)without a forklift truck for unloading, (3) requires appointment, (4)Home delivery. Buyer can ask for delivering to your closest Freight centre for pick up to avoid the surcharges. 

     Please allow 2 days handling time. This item ship to 48 USA continental states and Canada only. Travelling time is 2-10 business days.

     The shipping weight is around 280Lb including packing and the pallet. The motor is 187 Lb. Two person lift is required for unloading if a forklift truck is unavailable.