3" Tuhorse deep well submersible well pump
Sale

3" 1HP TH3-006-25 230V 1Ph. Complete Set incl motor, pump-end and control box

Tuhorse
SKU:
TH300625M230
US$699.00 US$399.00
(No reviews yet)
Weight:
39.00 LBS
Width:
44.00 (in)
Height:
10.00 (in)
Depth:
8.00 (in)
Condition:
New
Current Stock:
Description

Complete submersible deep well pump end, motor, and dual capacitor Control Box Pro set. Complete Instructions.

If you have a hard time pulling your old 4 inch pump off the well because the 4" steel well casing is rusted or the PVC casing is melted, consider to use a 3" pump instead.

This 6GPM pump is made for a low yield very deep well. It is suitable for a small family without a sprinkler system. 

Model: TH3-006-25

  • Fit 3-1/4 inch and larger ID well
  • HP: 1HP
  • Voltage: 230V Single Phase
  • Cycle: 60 Hz
  • Operating Amperage: 5.5 A
  • Motor RPM: 3450 RPM
  • Stages: 25
  • Maximum Head(cut off): 520 ft.
  • Rated Flow: 6 GPM
  • Maximum Flow (0-150 feet): 8.5 GPM
  • Open Flow vs Depth: 8GPM @ 240ft; 7GPM @ 320ft; 6GPM @ 400ft; 5GPM @ 440ft
  • Suction Port: Center Suction
  • Discharge Port: 1 inch NPT
  • Built-in Check-valve: Yes, but an external check valve is required in water tight system
  • Housing Material: Stainless Steel 304
  • Discharge and Suction Port Material:  Stainless Steel 304
  • Impeller Material: Thermal Plastic
  • Motor Enclosure: Stainless steel 304
  • Motor Bearing / Lubrication: Ball bearing, oil filled
  • Motor lead: 4 wires (3 wire + 1 ground)
  • Duty: Continuous or up to 30 restarting cycles / hour
  • Control Box: Dual capacitor control box included
  • Weight: 20 lbs.
  • Assembled Dimensions: 39.5" long x 2.87" diameter
  • Packing weight with control box: 33lbs
  • Packing Dimensions/Length: 44"x10"x8 (110cmx27cmx19cm 

 

Warranty
1 Year