1.5HP TS4-016-11 (Pump End Only)

Pump end only. Full Stainless Steel. Requires appropriate horse power motor and corresponding control box( if necessary) for operation.

This Tuhorse Pump-End is adaptable (compatible) to those major brand motors with same HP rating or larger, such as Franklin Electric, Pentair, Goulds 4" Submersible Motor for Deep Well Pump. NEMA standard.

• HP: Requires 1.5HP
• Voltage: N/A
• Cycle: N/A
• Operating Amperage: N/A
• Motor RPM: 3450 RPM
• Stages: 11
• Maximum Flow (0 - 90ft): 26GPM
• Maximum Head (cut off head): 330 ft.
• Typical Flow: 22GPM @ 180 ft; 19GPM @ 210 ft; 16GPM @ 240ft; 13GPM @ 260 ft.; 10GPM @ 275ft.; 7GPM @ 290ft.
• Suction Port: Center Suction
• Discharge Port: 1.25 in
• Built-in Check-valve: Yes
• Housing Material: Stainless Steel 304
• Impeller Material: Stainless Steel 304
• Motor Enclosure: n/a
• Duty: n/a
• Control Box: n/a
• Net Weight: 6 lbs
• Shipping Weight: 11 lbs
• Dimensions/Length: 12"(length) x 3.75(widest diameter)
• Shipping dimensions: Vary