0.8HP Jet Pump CJC800

(No reviews yet)
19.00 LBS
15.70 (in)
13.80 (in)
9.80 (in)
Current Stock:
Adding to cart… The item has been added


  • HP: 0.8HP
  • Voltage: 115V
  • Cycle: 60 Hz
  • Operating Amperage: 6A
  • Motor RPM: 3450 RPM
  • Stages: n/a
  • Maximum Head: 139 ft. (Maximum pressure 60 psi)
  • Maximum Flow: 15 GPM (Free flow)
  • Typical Flow: 13.5GPM @ 25ft; 12.5GPM @ 45ft; 9.5GPM @ 70ft; 4.7GPM @ 93ft; 1.9GPM @ 116ft.
  • Suction Port: 1in, max suction height: 25ft
  • Discharge Port: 1in
  • Built-in Check-valve: No
  • Housing Material: Motor - Cast Iron; Pump body - Stainless steel
  • Impeller Material: n/a
  • Motor Enclosure: TEFC
  • Duty: Continuous or intermittent duty
  • Control Box: n/a
  • Weight: 15 lb
  • Shipping weight: 19lb
  • Dimensions/Length: 13"L x 7"W x 11"H with handle; 13" x 6" x 7" without handle
  • Faxed or Portable: Yes


Usage: (1) For general water pumping, in continuous or intermittent duty, for clear or nearly clear water.

           (2) CJC800 Jet Pump can be used as a distribution pump in a domestic water system / irrigation system that pumps water from a storage tank or a shallow well. It works with your existing pressure switch and pressure tank(small or large) to form a automatic system. If you have a jet pumps with pressure switch and gauge attaching to the body that no longer works, CJC800 can be the ideal replacemet pump for that. All you need to do is to re-position the pressure switch and the gauge to anywhere in the pipe between the pump's discharge and the first shut off valve in the system.  In general this pump can be a replacement for shallow well jet pump that uses single suction pipe. It works with pressure switches with cut off setting at 55psi or lower.


1 Year