6" 20HP 3-Phase 460V 60Hz / 380V 50Hz full Stainless Steel Enclosure Motor (water cool)

(You save US$1,591.00 )
(No reviews yet) Write a Review
183.00 LBS
Current Stock:

Stainless Steel Motor. Water Cool and Lubrication. Motor housing must be filled up with purified water prior to use. This full S.S. motor is for mission critical duty, it is equipped with water thrust bearing advanced technology. Running the motor at full speed is recommended. If a VFD is used, running at less than 2700 RPM (or 45Hz) is prohibited. 

Control box (control panel) is not required, but a three phase power switch with overload protection is mandatory. Includes manual.


  • HP: 20HP
  • NEMA Standard
  • Compatible to NA major name brand products
  • Voltage: 460V 60Hz or 380V 50Hz Three Phase
  • Cycle: 60 Hz for 460V, or 50Hz for 380V
  • Operating Amperage: 26.2 A
  • Motor RPM: 3450 RPM at 60Hz / 2850 at 50Hz
  • Stages: n/a
  • Maximum Flow: N/A
  • Maximum Head: N/A
  • Typical Flow: N/A
  • Suction Port: N/A
  • Discharge Port: N/A
  • Built-in Check-valve: N/A
  • Housing Material: Stainless Steel
  • Impeller Material: N/A
  • Motor Enclosure: Stainless steel
  • Motor Bearing / Lubrication:  Water lubricated thrust bearing, water filled lubrication
  • Duty: Continuous or up to 15 restarting cycles / hour
  • Control Box: Control Box (Control Panel) not included
  • Net Weight: 155 lbs
  • Dimensions/Length:

Shipping information:

Due to the motor's weight is over the 150Lb limit set by regular courier services, this item will be delivered by UPS LTL Freight service. Subject to surcharge if buyer is (1) in rural area, (2)without a forklift truck or unable to help unloading, (3) requires appointment, (4)Home delivery. Buyer can ask for delivering to your closest UPS Freight center for pick up to avoid the surcharges. 

Please allow 2 days handling time. This item ship to 48 USA continental states and Canada only. Travelling time is 2-8 business days.

The shipping weight is around 195Lb including packing and the pallet. The motor is 163 Lb. Two person lift is required for unloading if a forklift truck is unavailable.

1 Year