5HP TH4-090-07 230V 1-Ph. Pump-end and Motor. (Deluxe Control Box Sold Separately)

5HP TH4-090-07 230V 1-Ph. Pump-end and Motor. (Deluxe Control Box Sold Separately)

SKU:
TH409007M230
US$719.00
US$1,380.00
(You save US$661.00 )
(No reviews yet) Write a Review
Weight:
67.00 LBS
Width:
44.50 (in)
Height:
11.00 (in)
Depth:
7.50 (in)
Condition:
New
Current Stock:
Description

This product is out of stock. Please buy TS407508M230 full stainless steel version.    

 

This is our highest flow 4" well pump. It is made for using in sprinkler systems, dripping irrigation systems and open flow applications, such as keeping up a fishing pond. It  pumps 70 to 120GPM with Total Dynamic Head (TDH) range between 135 feet to 70 feet. 

  For using with a sprinkler system, please refer to the nozzle pressure vs flow data and use our TDH Calculator to determine if this pump fits your application.  

  • HP: 5HP
  • Voltage: 230V, Single Phase
  • Cycle: 60 Hz
  • Operating Amperage: 23 A
  • Motor RPM: 3450 RPM
  • Stages: 7
  • Maximum Head(cut off): 170ft
  • Rated Flow: 90GPM
  • Maximum Flow(0-70 ft.): 120GPM
  • Open Flow vs Depth: 100GPM @ 90ft; 90GPM @ 110t; 80GPM @ 125ft; 70GPM @ 135ft; 60 GPM @ 145ft.
  • Suction Port: Center Suction
  • Discharge Port: 2 in
  • Built-in Check-valve: Yes
  • Pump Housing Material: Stainless Steel, Grade 304
  • Discharge and Suction Port Material: Brass
  • Impeller Material: Thermal Plastic
  • Motor Enclosure: Stainless steel Grade 304
  • Motor Bearing / Lubrication: Ball bearing, oil filled lubrication
  • Motor lead: 4 wires (3 wire + 1 ground)
  • Duty: Continuous or up to 20 restarting cycles / hour
  • Control Box: NOT Included, Deluxe Box is required and sold separately. Find it here
  • Weight: 67 lbs
  • Dimensions/Length: 65"

 

Warranty
1 Year