3HP TH4-090-04 230V 1Ph. Complete pump-end, motor, control box pro set

(You save US$390.00 )
(1 review) Write a Review
50.60 LBS
38.60 (in)
11.00 (in)
7.50 (in)

Currently out of stock, please buy TS407504M230 instead.

90GPM rated, 120GPM Max.

Complete pump end, motor, and dual capacitor control box set. Complete Instructions.

 Note: This pump is suggested for free flow, low head or low pressure application, due to its low pressure and high flow features. 

  • HP: 3HP
  • Voltage: 230V Single Phase
  • Cycle: 60 Hz
  • Operating Amperage: 13.6 A
  • Motor RPM: 3450 RPM
  • Stages: 4
  • Maximum Head(cut off): 115 ft
  • Maximum Flow: 120 GPM
  • Free Flow Rates: 100GPM @ 50ft; 90GPM @ 65ft; 70GPM @ 75ft; 40GPM @ 92ft
  • Suction Port: Center Suction
  • Discharge Port: 2 in
  • Built-in Check-valve: Yes
  • Housing Material: Stainless Steel, Grade 304
  • Impeller Material: Thermal Plastic
  • Motor Enclosure: Stainless steel, Grade 304
  • Duty: Continuous or up to 30 restarting cycles / hour
  • Control Box: dual capacitor control box
  • Weight: 50.6 lbs
  • Dimensions/Length: 40"

Note: We recommend you to use our TDH calculator in selecting a pump for your application

1 Year


  • 5
    Exceeded expectations

    Posted by Brian Staats on 22nd Jun 2019

    I have purchased two of these pumps. They were shipped as promised. Had what was needed to get them installed. One has been running solid for two and a half months for a dewatering well without issues. The second pump has been running 45 days. Seems like a very good value