1.5HP TH4-015-10 230V 1Ph. Complete pump end, motor, control box pro set

While it is early....the pump has been in constant use since its installation.... The ease of installation was very much appreciated.

I reviewed the website info on calculating what type of pump to buy and this was the one I came up with. It had the same rating as pump being replaced except it uses half the amp usage. (less power consumption than old pump) I replaced my wells 275' 1.5" gal pipe with 1" 200 psi black poly one piece piping and installed the pump myself, without the use of a well company rig. The control box was easy to install, I just wired it per instructions, noting the wire colors and position of the old control box I was replacing. The entire assembly and installation were easier than expected. The instructions were easy to follow. I had two questions, I called company for assistance on each and actually spoke to a person that kindly and professionally answered my question and satisfied my installation assistance needs. When installed and turned on, I had the pump head open and WOW Water in 1 minute appears from an empty pipe 281' long at the rate of 10 gallons per minute. This pump is so quiet, that the only way I can tell it is on when water is not turned on; is to listen for a slight hum coming from the control box. I am more than pleased with this pump motor and assembly. As for electrical use savings, I checked the meter and this pump cycles twice as fast as the old one, using one half the KWH electricity at a lower amperage rate. The old pump cycled longer maybe because it was worn, if so, I fell this pump will continue to operate at half the amperage until it wears out. Been operating perfect now for 2 weeks. I will certainly buy Tuhorse products again and I have been referring it to my friends, neighbors and associates that also have private water wells here in the U.S. Arizona southern desert.