2HP TH4-030-08 (Pump End Only)

US$359.00 US$199.00
(1 review)
13.00 LBS
Current Stock:

30GPM rated, 40GPM Max.

Pump end only, you will require a 4" NEMA Standard 2HP submersible motor and corresponding control box to operate this pump end.

  • Stages: 8
  • Maximum Head(cut off): 260 ft
  • Maximum Flow(0-70feet): 40 GPM
  • Free Flow Rates:  37GPM @ 115ft; 35GPM @ 135ft; 30GPM @ 180ft; 25GPM @ 220ft, 20GPM @240
  • Suction Port: Center Suction
  • Discharge Port: 1.5 in
  • Built-in Check-valve: Yes
  • Housing Material: Stainless Steel, Grade 304
  • Impeller Material: Thermal Plastic
  • Duty: Continuous or up to 30 restarting cycles / hour

Note: We recommend you to use our TDH calculator in selecting a pump for your application

1 Year


  • 5
    40 gal/min pump solves proble

    Posted by Charlie Woll on 29th Sep 2016

    I had problems with irrigation system flow at top of property. This 40 gpm pump delivered enough flow to meet my needs. Folks at Tuhorse were more knowledgeable than any other supplier and very helpful.