3HP TH4-070-06 230V 1Ph. Complete pump-end, motor, control box pro set

(You save US$390.00 )
(No reviews yet) Write a Review
50.60 LBS
38.60 (in)
11.00 (in)
7.50 (in)
Current Stock:

Sold out, check this full stainless steel version TS407504M230 Note that is ha higher flow buy a little less pressure


70 GPM Rated, 95GPM Max

Complete pump end, motor, and dual capacitor control box set. Complete Instructions.

 Note: This pump is low pressure, high flow. We suggest it to be used in free flow or low TDH applications, such as low head pumping to a holding tank, a pond or a dripping irrigation system. It is not made for a domestic water system with a pressure tank.

  • HP: 3HP
  • Voltage: 230V Single Phase
  • Cycle: 60 Hz
  • Operating Amperage: 13.6 A
  • Motor RPM: 3450 RPM
  • Stages: 6
  • Maximum Flow: 95GPM
  • Maximum Head: 160ft
  • Typical Flow: 90GPM @ 60ft; 80GPM @ 75ft; 70GPM @ 90 ft; 60GPM @ 105 ft; 40GPM @ 125ft
  • Suction Port: Center Suction
  • Discharge Port: 2 in
  • Built-in Check-valve: Yes
  • Housing Material: Stainless Steel
  • Impeller Material: Thermal Plastic
  • Motor Enclosure: Stainless steel
  • Duty: Continuous or up to 30 restarting cycles / hour
  • Control Box: motor start box included
  • Weight: 50.60 lbs
  • Dimensions/Length: n/a


This TH4-070-06 is formerly our TH4-MA-06. The pump curve remains the same because they are the same pump. We are in the process changing the model name to reflect the flow rate. 070 stands for 70GPM. The new model numbers help our customers to choose the right pump easier.

1 Year