This solar pump kit is suitable for 80 to 260 feet head (TDH), with daily water usage of 2000 to 6000 gallon.
4 x 280 Watts mono crystalline A-grade solar panel
4" 1000 Watts 110 Volts, stainless steel centrifugal solar pump and motor
165 feet submersible pump cable (optional purchase up to 300 feet)
Automatic control box
2 x water level sensor for setting up automatic pumping
2 x 10 ft. MC4 cable w/ M-F connectors, for connecting solar panel to control box
Heat shrink kit for watertight connection
2 year warranty (return to BC Canada*)
If you need longer than 165 ft wire but no more than 300 ft, you can order the additional wire, we will cut one continuous wire for you.
|Production based on 6 hours peak sun daily|
|Head (ft.)||Gallon / min||Gallon / day|
|260 ft||5.5 Gal.||1980 Gal|
|220 ft.||8.8 Gal||3168 Gal|
|160 ft.||14 Gal||5040 Gal|
|80 ft.||17 Gal||6120 Gal|
4THS10C110V1000 Solar Water Pump Specifications:
Fit 4" inside diameter and larger well
1000W, 110V-DC nominal operating power
1-1/4" NPTF discharge (outlet)
10GPM rated, 17GPM Max.
Centrifugal stainless steel impellers design
Pump Diameter, length: 4" x 21" (100mm x 680mm)
Pump Net weight: 20Lb (9kg), excluding control box
Package Weight: 35Lb / 16kg, including control box
Soft start, DC solar power is converted to 3-phase to power the pump motor
Maximum submersion - 150 feet
Solar Panel shipping weight and dimensions(estimate): 4 x dual panel pack, each of 72Lb (32kg), 64"x33"x4"(161x85x10cm)
Auto control box specifications:
Optimize pumping efficiency with MPPT according to sunlight condition and
solar panel used
Fully automatic pumping mode using water level sensor(s)
Bypass sensors for application that does not require water level monitoring
Adjustable motor speed to accommodate low-yield-well and to protect motor from over powered
Adjustable timer adding delay time for low-yield-well to recover in automatic mode
Low power protection
Dry run protection in automatic mode
Maximum input withstand Voc = 200V (solar panel open circuit voltage)
Maximum input current 12.5 amps
Important shipping note for solar panels:
Due to the large size of the 195 or 280W solar panel, any orders that includes solar panel will only be shipped with Ground Service. Please do not choose 2 day or 1 day services even the options are displayed during check out. There is no air service available for the size of our 195W or 280W PV panel. We ship to Canada and 50 US States. Puerto Rico customers please buy solar pump packages without PV Panel as we do not have over size shipping available for PR.
Duty and Fee:
We prepaid duty and customs fee for all our USA buyers in the 50 States when goods entering from Canada to the USA. This is part of our service excellence to ensure that USA buyers will not receive an unexpected bill. Buyers are responsible for taxes, if there is any, just like you may pay taxes when you buying anything in the USA. For your information, we have not seen our USA customer who is required to pay taxes for an order that is under $2500. We don't seems have seen taxes were charged, but please consult your local governments for tax detail if the order is over $2500.
Easy to install plug and play. when works low sun light pump runs too slow pumping water.we put in a pressure switch. it'd be nice have a controller to shut down pump when sun light is too low.
This pump kit was exactly as described and very easy to install we are very pleased with it. I had some questions about how to add a pressure switch to the system due to a somewhat complex situation we have, they immediately called me and walked me though how to install it and also followed up with me to see how it was working. I couldn't be more happy!
The product went together great. Basic plug and play. The product also works great when the sun is not shining directly on it. However it would be nice to have a battery storage so that when the sky is cloudy there is still some energy to operate the pump.