Sale

4" 1000W 10GPM Solar Submersible Deep Well Pump, 1225W Solar Panel, 200 feet Cable Complete Kit

SKU:
4THS10C110V1000K7P
US$3,990.00 US$2,650.00
(3 reviews) Write a Review
Weight:
120.00 LBS
Current Stock:

1000 Watts 4" Submersible Pump and 1225W PV Panel Complete Kit (4THS10C110V1000K7P)

This solar pump kit is suitable for 80 to 260 feet head (TDH), with daily water usage of 2000 to 6000 gallon.

Package includes:

7 x 175 Watts mono crystalline A-grade solar panel (1225 Watts)
4" 1000 Watts 110 Volts, stainless steel centrifugal solar pump and motor
200 feet 12/3 submersible pump cable 
Automatic control box
2 x water level sensor for setting up automatic pumping
2 x 10 ft. MC4 cable w/ M-F connectors, for connecting solar panel to control box
Heat shrink kit for watertight connection
Installation guide
2 year warranty (return to BC Canada*)

If you need longer than 200 ft wire, you can order the additional wire. We will cut one continuous wire for you. For example, if you need 200 ft of wire, order 50 ft of additional wire, and we will provide one continuous strip of 200 ft wire. 

Production based on 6 hours peak sun daily 
Head (ft.) Gallon / min Gallon / day
260 ft 5.5 Gal. 1980 Gal
220 ft. 8.8 Gal 3168 Gal
160 ft. 14 Gal 5040 Gal
80 ft. 17 Gal 6120 Gal

 

4THS10C110V1000 Solar Water Pump Specifications:  

Fit 4.5" inside diameter and larger well
1000W, 110V-DC nominal operating power
1-1/4" NPTF discharge (outlet)
10GPM rated, 17GPM Max.
Centrifugal stainless steel impellers design
Pump Diameter, length: 4" x 21" (100mm x 680mm)
Pump Net weight: 20Lb (9kg), excluding control box
Package Weight: 35Lb / 16kg, including control box
Soft start, DC solar power is converted to 3-phase to power the pump motor
Maximum submersion - 300 feet

Auto control box specifications:

Optimize pumping efficiency with MPPT according to sunlight condition and
solar panel used
Fully automatic pumping mode using water level sensor(s)
Bypass sensors for application that does not require water level monitoring
Adjustable motor speed to accommodate low-yield-well and to protect motor from over powered
Adjustable timer adding delay time for low-yield-well to recover in automatic mode
Low power protection
Dry run protection in automatic mode
Maximum input withstand Voc = 200V (solar panel open circuit voltage)
Maximum input current 12.5 amps

Important shipping note for solar panels:

Due to the large size of the solar panel, any orders that includes solar panel will only be shipped with Ground Service. Please do not choose 2 day or 1 day services even the options are displayed during check out. There is no air service available for the size of the panel. We ship to Canada and 48 US States. Hawaii, Puerto Rico and Alaska customers please buy solar pump packages without Solar Panel.

2 year warranty (return to BC Canada*) Starting from January 2017, all Tuhorse Solar Pump Complete Kits come with 2 year warranty

Reviews

  • 5
    Posted by Jim 2019/06

    Posted by Unknown on 22nd Jun 2019

    Easy to install plug and play. when works low sun light pump runs too slow pumping water.we put in a pressure switch. it'd be nice have a controller to shut down pump when sun light is too low.

  • 5
    Great product, great service!

    Posted by Jacob Tindell on 14th Feb 2018

    This pump kit was exactly as described and very easy to install we are very pleased with it. I had some questions about how to add a pressure switch to the system due to a somewhat complex situation we have, they immediately called me and walked me though how to install it and also followed up with me to see how it was working. I couldn't be more happy!

  • 4
    Works great but.....

    Posted by Jacquie Leeming on 26th Sep 2017

    The product went together great. Basic plug and play. The product also works great when the sun is not shining directly on it. However it would be nice to have a battery storage so that when the sky is cloudy there is still some energy to operate the pump.