I reviewed the website info on calculating what type of pump to buy and this was the one I came up with. It had the same rating as pump being replaced except it uses half the amp usage. (less power consumption than old pump) I replaced my wells 275' 1.5" gal pipe with 1" 200 psi black poly one piece piping and installed the pump myself, without the use of a well company rig. The control box was easy to install, I just wired it per instructions, noting the wire colors and position of the old control box I was replacing.
The entire assembly and installation were easier than expected. The instructions were easy to follow. I had two questions, I called company for assistance on each and actually spoke to a person that kindly and professionally answered my question and satisfied my installation assistance needs.
When installed and turned on, I had the pump head open and WOW Water in 1 minute appears from an empty pipe 281' long at the rate of 10 gallons per minute. This pump is so quiet, that the only way I can tell it is on when water is not turned on; is to listen for a slight hum coming from the control box.
I am more than pleased with this pump motor and assembly. As for electrical use savings, I checked the meter and this pump cycles twice as fast as the old one, using one half the KWH electricity at a lower amperage rate. The old pump cycled longer maybe because it was worn, if so, I fell this pump will continue to operate at half the amperage until it wears out. Been operating perfect now for 2 weeks.
I will certainly buy Tuhorse products again and I have been referring it to my friends, neighbors and associates that also have private water wells here in the U.S. Arizona southern desert.