Pump end only. Requires appropriate horse power motor and corresponding control box( if necessary) for operation.
This Tuhorse Pump-End is Adaptable (compatible) to those major brand motors with same HP rating or larger, Such as Franklin Electric 6" Submersible Motor for Deep Well Pump. NEMA standartd.
- HP: Requires 20HP
- Voltage: N/A
- Cycle: N/A
- Operating Amperage: N/A
- Motor RPM: 3450 RPM
- Stages: 6
- Maximum Flow: 240 GPM
- Maximum Head: 400 ft
- Typical Flow: 211GPM @ 210ft; 185GPM @ 260ft; 159GPM @ 310 ft; 132GPM @ 340ft; 106GPM @ 370ft
- Suction Port: Center Suction
- Discharge Port: 3 inch NPTF
- Built-in Check-valve: Yes
- Housing Material: Stainless Steel
- Impeller Material: Thermal Plastic
- Motor Enclosure: n/a
- Duty: n/a
- Control Box: n/a
- Net Weight: 43 lbs (20Kg)
- Net Length: 40-3/4" (103.5cm)
- Shipping Demension: 43"x8"x7" (109x19x18cm); 47Lb (21Kg)
