6" 10HP 3-Phase 460V full Stainless Steel Enclosure Motor (water cool)

Stainless Steel Motor. Water Cool and Lubrication. Motor must be filled with purified water(distilled water) prior to use. This full S.S. motor is for mission critical duty. It equips with water bearing advanced technology. Running the motor at full speed of 3450 RPM is recommended. Do not use it with a VFD 

Control box (control panel) is not required, but a three phase power switch with overload protection is mandatory. Includes manual.

• HP: 10HP
• NEMA Standard
• Compatible to NA major name brand products
• Voltage: Three Phase 460V 60Hz
• Cycle: 60Hz
• Operating Amperage: 15.5 A
• Motor RPM: 3450 RPM
• Stages: n/a
• Maximum Flow: N/A
• Maximum Head: N/A
• Typical Flow: N/A
• Suction Port: N/A
• Discharge Port: N/A
• Built-in Check-valve: N/A
• Housing Material: Stainless Steel
• Impeller Material: N/A
• Motor Enclosure: Stainless steel
• Motor Bearing / Lubrication:  Water lubricated thrust bearing, water filled lubrication
• Duty: Continuous or up to 15 restarting cycles / hour
• Control Box: Control Box (Control Panel) Optional
• Shipping Weight: 116 lbs
• Shipping Dimensions/Length: 37.5" x 10" x 8"