6" 20HP 3-Phase 460V Motor Only

Motor only. Control box (control panel) is not mandatory, but a three phase power switch with overload protection is required. Includes manual.

• HP: 20HP
• NEMA Standard
• Compatible to NA major name brand products
• Voltage: 460V Three Phase
• Cycle: 60 Hz
• Operating Amperage: 25 A
• Motor RPM: 3450 RPM
• Stages: n/a
• Maximum Flow: N/A
• Maximum Head: N/A
• Typical Flow: N/A
• Suction Port: N/A
• Discharge Port: N/A
• Built-in Check-valve: N/A
• Housing Material: Stainless Steel
• Impeller Material: n/a
• Motor Enclosure: Stainless steel and Cast Iron
• Duty: Continuous or up to 20 restarting cycles / hour
• Control Box: Three phase power switch with overload protection is required.
• Weight: 136 lbs
• Dimensions/Length: N/A

Minimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector / Circuit breaker. The protector / breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector / breaker or a protection device that does not cause phase loss (missing phase) problem.