Loading... Please wait...

Our Newsletter

10HP TH6-250-03 460V 3-Phase. Pump-end and Motor

Retail Price:
US$1,439.00 (You save US$911.00)
115.00 LBS
Calculated at checkout

Sorry but this item is currently unavailable.

Please check back at a later stage.

Product Description

Complete pump end and motor set. Complete Instructions.


  • HP: 10HP
  • Voltage: 460V Three Phase
  • Cycle: 60 Hz
  • Operating Amperage: 13.8 A
  • Motor RPM: 3450 RPM
  • Stages: 3
  • Rated Flow: 250 GPM
  • Maximum Flow: 290 GPM
  • Maximum Head: 195 ft
  • Typical Flow: 290GPM @ 75ft; 250GPM @ 110ft; 200GPM @ 140 ft; 150GPM @ 160 ft; 110GPM @ 175 ft.
  • Suction Port: Center Suction
  • Discharge Port: 3 inch NPT Female
  • Built-in Check-valve: Yes
  • Housing Material: Stainless Steel
  • Impeller Material: Thermal Plastic
  • Motor Enclosure: Stainless steel
  • Duty: Continuous or up to 20 restarting cycles / hour
  • Control Box: Control Box (Control Panel) Optional
  • Weight: 115 lbs
  • Dimensions/Length: N/A


Minimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector / Circuit breaker. The protector / breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use 3 x 1-Phase breakers, You must use a real 3-phase breaker that do not cause missing phase problem.

Warranty Information

1 Year

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the 10HP TH6-250-03 460V 3-Phase. Pump-end and Motor to your wish list.

You Recently Viewed...