10HP TH6-110-05 460V 3Ph. Pump-end and Motor

(You save US$911.00 )
(No reviews yet) Write a Review
119.00 LBS
Current Stock:

Complete pump end and motor set. Control box (control panel) is not mandatory, but a three phase power switch with overload protection is required. Complete Instructions.


  • HP: 10HP
  • Voltage: 460V Three Phase
  • Cycle: 60 Hz
  • Operating Amperage: 13.8 A
  • Motor RPM: 3450 RPM
  • Stages: 5
  • Maximum Flow: 132 GPM
  • Maximum Head: 354 ft
  • Typical Flow: 106GPM @ 193ft; 97GPM @ 246ft; 66GPM @ 301ft
  • Suction Port: Center Suction
  • Discharge Port: 2.5" NPT
  • Built-in Check-valve: Yes
  • Housing Material: Stainless Steel
  • Impeller Material: Thermal Plastic
  • Motor Enclosure: Stainless steel
  • Duty: Continuous or up to 30 restarting cycles / hour
  • Control Box: Three phase power switch with overload protection is required.
  • Weight: 110 lbs
  • Shipping weight: 119 lbs
  • Dimensions/Length: 49.75"


Minimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector / Circuit breaker. The protector / breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector / breaker or a protection device that does not cause missing phase problem.

1 Year