10HP TH6-110-05 230V 3-Phase. Pump-end and Motor

(You save US$893.00 )
(No reviews yet) Write a Review
119.00 LBS
Current Stock:

Complete pump end and motor set. Complete Instructions. Tuhorse Control Panel sold separately.


  • HP: 10HP
  • Voltage: 230V Three Phase
  • Cycle: 60 Hz
  • Operating Amperage: 26.4 A
  • Motor RPM: 3450 RPM
  • Stages: 5
  • Maximum Flow: 132 GPM
  • Maximum Head: 354 ft
  • Typical Flow: 106GPM @ 193ft; 97GPM @ 246ft; 66GPM @ 301ft
  • Suction Port: Center Suction
  • Discharge Port: 2.5 inch NPT Female
  • Built-in Check-valve: Yes
  • Housing Material: Stainless Steel
  • Impeller Material: Thermal Plastic
  • Motor Enclosure: Stainless steel
  • Duty: Continuous or up to 30 restarting cycles / hour
  • Control Box: Control Box (Control Panel) Optional
  • Weight: 110
  • shipping weight: 119 lbs
  • Dimensions/Length: 49.75"


If you do not purchase a Tuhorse Control Panel for this pump, below is the mimimum requirement for operating and protecting the pump.

Minimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector / Circuit breaker. The protector / breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use 3 x 1-Phase breakers, You must use a real 3-phase breaker that do not cause missing phase problem.

1 Year