{"product_id":"20hp-ts8-450-02a-460v-3-phase-8-pump-end-and-6-oil-filled-motor-stainless-steel-impellers","title":"20HP TS8-450-02A 460V 3-Phase, 8\" Pump-end and 6\" Oil-Filled Motor, Stainless Steel Impellers","description":"\u003cp\u003eComplete nominal 8\" pump-end (wet-end) with 6\" motor bracket and 6\" oil-filled motor. This motor and pump can be installed either vertically or horizontally\u003c\/p\u003e \u003cp\u003eFit 8\" ID well casing, overall maximum diameter is 7 inches.  \u003c\/p\u003e \u003cp\u003eControl box (control panel) is not mandatory, but a three phase power switch with overload protection is required.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eHP: \u003c\/strong\u003e20HP\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eVoltage: \u003c\/strong\u003e460V Three Phase\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCycle: \u003c\/strong\u003e60 Hz\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eOperating Amperage: \u003c\/strong\u003e25A\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor RPM: \u003c\/strong\u003e3450 RPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eStages: \u003c\/strong\u003e2\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaximum Head (cut off): \u003c\/strong\u003e200 ft.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaximum Flow( 0-90 ft.): \u003c\/strong\u003e580 GPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eRated Flow:\u003c\/strong\u003e 450GPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cstrong\u003eFree \u003c\/strong\u003e\u003c\/strong\u003eFlow Rate: \u003c\/strong\u003e520GPM @ 105ft; 450GPM @ 125ft; 395GPM @ 138ft; 350GPM @ 145ft; 200GPM @ 170ft.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSuction Port: \u003c\/strong\u003eCenter Suction S.S. 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDischarge Port: \u003c\/strong\u003e5 inch NPT Female S.S. 304 (5\" to 4\" NPT adapter \u003ca href=\"\/products\/5-npt-male-to-4-npt-female-adaptor-reducer-stainless-steel\"\u003esold separately\u003c\/a\u003e if needed)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBuilt-in Check-valve: \u003c\/strong\u003eYes, S.S. 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eHousing Material: \u003c\/strong\u003eStainless Steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eImpeller Material: \u003c\/strong\u003estainless steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Body and Top: \u003c\/strong\u003eStainless steel 304  \u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Base\u003c\/strong\u003e: Cast Iron\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDischarge and Suction Port Material: \u003c\/strong\u003e Stainless Steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Bearing \/ Lubrication:\u003c\/strong\u003e\u003cspan\u003e Ball bearing, Oil filled lubrication\u003c\/span\u003e\n\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDuty: \u003c\/strong\u003eContinuous or allow maximum 15 restarting cycles \/ hour\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eControl Box: \u003c\/strong\u003eThree phase power switch with overload protection is required(not included)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eNet Weight: \u003c\/strong\u003e180 Lbs.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 190 (150+40) Lbs.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDimensions\/Length(pump and motor assembly): \u003c\/strong\u003e65\"\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003eMinimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector \/ Circuit breaker. The protector \/ breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do \u003cstrong\u003eNOT\u003c\/strong\u003e use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector \/ breaker or a protection device that does not cause phase loss (missing phase) problem.\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e* \u003c\/span\u003e\u003cspan\u003eNot exactly as shown in photos due to stage and HP vary from model. Photos are for illustrations only.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #0000ff; font-size: large; background-color: #ffffff;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Tuhorse","offers":[{"title":"Default Title","offer_id":52023221158168,"sku":"TS845002T460A","price":2488.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0978\/4492\/0600\/files\/TS845002T460A_Front_View_Website__74318.jpg?v=1777849802","url":"https:\/\/www.tuhorse.us\/products\/20hp-ts8-450-02a-460v-3-phase-8-pump-end-and-6-oil-filled-motor-stainless-steel-impellers","provider":"Tuhorse Pumps","version":"1.0","type":"link"}