Loading... Please wait...

Our Newsletter

3" 1HP TH3-010-18 230V 1Ph. Complete Set incl motor, pump-end and control box

Retail Price:
US$389.00 (You save US$170.00)
39.00 LBS
Calculated at checkout

Product Description

If you have a hard time pulling your old 4 inch pump out of the well because the 4" steel well casing is rusted or the PVC casing is melted, consider to use a 3" pump instead.

This pump is also an ideal replacement for your jet pump. Go green, tired of priming your jet pump? get rid of your jet pump and use this higher efficient submersible!


Model: TH3-010-18

  • Fit 3 inch and larger ID well
  • HP: 1HP
  • Voltage: 230V Single Phase
  • Cycle: 60 Hz
  • Operating Amperage: 5.5 A
  • Motor RPM: 3420 RPM
  • Stages: 18
  • Rated Flow: 10 GPM
  • Maximum Flow: 14 GPM
  • Maximum Head: 280 ft
  • Typical Flow: 13.2GPM @ 141ft; 10.6GPM @ 190ft; 7.9GPM @ 226ft; 5GPM @ 251ft
  • Suction Port: Center Suction
  • Discharge Port: 1 inch NPT
  • Built-in Check-valve: Yes, but an external check valve is required in water tight systems
  • Housing Material: Stainless Steel 304
  • Impeller Material: Thermal Plastic
  • Motor Enclosure: Stainless steel 304
  • Motor Lead: 4 wires (3 wire + 1 ground)
  • Duty: Continuous or up to 30 restarting cycles / hour
  • Control Box: Dual capacitor control box
  • Weight: 23 lbs
  • Shipping weight: 33lbs
  • Packaging: 44" x 10" x 8"
  • Dimensions/Length: 113cm long, 7.3 cm diameter (44.5" long, 2.87" diameter)


Warranty Information

1 Year

Find Similar Products by Category

Write your own product review

Product Reviews

Previous | Showing reviews 11-20 of 20

  1. 3 inch pump and motor 5 Star Review

    Posted by on 2nd Mar 2015

    This is a small diameter pump 2 7/8 od This little pump works great for tight holes pumps great and in my well at 160 feet produce's 12 GPM.THANKS FOR A GREAT PRODUCT

  2. tuhorse 3" pump 5 Star Review

    Posted by on 6th Dec 2014

    Awesome product. Easy to install and excellent workmanship. Our friend who owns a pump company took all the information on this pump for future orders, he was really impressed.Thank you for making my life easier with this product. We had an above ground pump that had to be primed everytime we went to our camp. Not at all a fun job. Now we just flip the switch. Thanks again.

  3. Awesome 5 Star Review

    Posted by on 1st Dec 2014

    Awesome product at a more than just right price!!

    Somewhat easy to install as well! Would put that into anyone's deep well any day!

  4. 3" 1 HP sub pump 5 Star Review

    Posted by on 21st Oct 2014

    I installed the pump in a 3" pipe casting in 65 ft deep water well for my rainbird sprinkler system. Have about 6 heads running on each zone. So far doing a good job! I was impressed at the quality of the pump and control box.hope they keep making this unit.So I can buy my next pump from them. I live in south Ala. and received mine in eight days with regular UPS shipping. Great job!

  5. 3" sub pump 4 Star Review

    Posted by on 21st Oct 2014

    replaced a 4" well pump that could not be lowered any deeper than 150' into an OLD 6" steel windmill well casing. The 3" was successfully installed at a depth of 205' and is performing well so far. Total continuous run time was 3 hours with now slow down in the capacity of about 8gpm. Installed with 1" 160psi poly pipe and 2 check valves. Pleased with purchase and look forward to pump running for many years.

  6. 3" sub pump 5 Star Review

    Posted by on 16th Apr 2014

    I have the pump installed in a shallow well and it is performing good at this writing. I did have to pull pump back up to last joint of pipe and retighten as it was unscrewing the pipe, almost lost the connection. I called a local pump installer and was instructed to get connections as tight as possible.
    As far as the Tuhorse goes, I have not had any trouble yet. Product seams to be of excellent quality. Shipping was very fast and unit was packed very good. Unit had good instructions and illustrations.
    Thanks for a good product
    Jess A

    Comments from Tuhorse tech support:
    Do not screw the pipe too much into the discharge as that could block the internal check valve from opening. Tuhorse pumps require an external check valve installed in line, anywhere from 0 to 25 feet above the pump's discharge when the pump is used in a water tight system (e.g. in a domestic water system with a pressure tank).

  7. good product 4 Star Review

    Posted by on 24th Feb 2014

    my first submersible pump. replaced a gould's jet pump that I had on my 3 in casing. works fine and supplies plenty of water.

  8. great pump for the money. 4 Star Review

    Posted by on 1st Oct 2013

    I installed the pump a few days ago and it seems to be working really good. It pumps the water really fast.

  9. 3 in pump 5 Star Review

    Posted by on 9th Jul 2013

    it fit right in the casing. worked great

  10. Pump works fine, so far. 3 Star Review

    Posted by on 25th Jun 2013

    Used this pump to dewater and develop a 4" well for a sanitary landfill monitoring well. Worked
    fine, until some of the sealing material got in pump. A simple reversal of leads to run pump backwards and it took right off again. Seems to be a good pump and could compete with grundfos 3" pumps if sized right.

Previous | Showing reviews 11-20 of 20

Currency Converter

Choose a currency below to display product prices in the selected currency.

US Dollar

Add to Wish List

Click the button below to add the 3" 1HP TH3-010-18 230V 1Ph. Complete Set incl motor, pump-end and control box to your wish list.

You Recently Viewed...