{"title":"8 Inch Deep Well Pumps","description":"\u003cp\u003eTuhorse 8\" submersible pump are made for flow demanding applications using in agriculture and industry. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eApplications:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAgricultural Irrigation - Pivot, dripping, sprinkler, golf course\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCommercial, Construction site de-watering\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIndustrial\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"8-inch-deep-well-pumps-30hp-ts8-450-03-460v-3-phase-8in-pump-end-and-6in-water-filled-motor-stainless-steel-impellers","title":"30HP TS8-450-03 460V 3-Phase, 8\" Pump-end and 6\" Water-filled Motor, Stainless Steel Impellers","description":"\u003cp\u003eComplete nominal 8\" pump end with 6\" motor bracket, and 6\" motor. User must fill up distilled water into the motor before running it(roughly 3 gallons).\u003c\/p\u003e \u003cp\u003eFit 8\" ID well casing, overall maximum diameter is 7 inches.  \u003c\/p\u003e \u003cp\u003eControl box (control panel) is not mandatory, but a three phase power switch with overload protection is required.\u003c\/p\u003e \u003cp\u003eThis full stainless steel, water lubrication pump and motor is recommended for community water system. It is also better for using in lite corrosive water.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eHP: \u003c\/strong\u003e30HP\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eVoltage: \u003c\/strong\u003e460V Three Phase\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCycle: \u003c\/strong\u003e60 Hz\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eOperating Amperage: \u003c\/strong\u003e35.4A\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor RPM: \u003c\/strong\u003e3450 RPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eStages: \u003c\/strong\u003e3\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaximum Head (cut off): \u003c\/strong\u003e300 ft.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaximum Flow( 0-100 ft.): \u003c\/strong\u003e580 GPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eRated Flow:\u003c\/strong\u003e 450GPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cstrong\u003eFree \u003c\/strong\u003e\u003c\/strong\u003eFlow Rate: \u003c\/strong\u003e500GPM @ 175ft; 450GPM @ 195ft; 400GPM @ 202ft; 300GPM @ 238 ft; 200GPM @ 260ft.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSuction Port: \u003c\/strong\u003eCenter Suction\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDischarge Port: \u003c\/strong\u003e5 inch NPT Female\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBuilt-in Check-valve: \u003c\/strong\u003eYes, S.S. 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eHousing Material: \u003c\/strong\u003eStainless Steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eImpeller Material: \u003c\/strong\u003estainless steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Enclosure: \u003c\/strong\u003eStainless steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDischarge and Suction Port Material: \u003c\/strong\u003e Stainless Steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Bearing \/ Lubrication:\u003c\/strong\u003e\u003cspan\u003e  Water lubricated thrust bearing, water filled lubrication(user must fill up distilled water into motor)\u003c\/span\u003e\n\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDuty: \u003c\/strong\u003eContinuous or allow maximum 15 restarting cycles \/ hour\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eControl Box: \u003c\/strong\u003eThree phase power switch with overload protection is required(not included)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eNet Weight: \u003c\/strong\u003e230 Lbs.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 280 Lbs. (ship with LTL Freight only, see detail) \u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDimensions\/Length(pump and motor assembly): \u003c\/strong\u003e76\" (190cm)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003eMinimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector \/ Circuit breaker. The protector \/ breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do \u003cstrong\u003eNOT\u003c\/strong\u003e use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector \/ breaker or a protection device that does not cause phase loss (missing phase) problem.\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e* \u003c\/span\u003e\u003cspan\u003eNot exactly as shown in photos due to stage and HP vary from model. Photos was taken from one of the 10HP for illustrations only.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #0000ff; font-size: large; background-color: #ffffff;\"\u003eShipping information:\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003eDue to the weight is over the 150Lb limit set by regular courier services, this item will be delivered by LTL Freight service. Subject to surcharge if buyer is (1) in rural area, (2)without a forklift truck for unloading, (3) requires appointment, (4)Home delivery. Buyer can ask for delivering to your closest ABF or TForce Freight center for pick up to avoid the surcharges. \u003c\/p\u003e \u003cp\u003ePlease allow 2 days handling time. This item ship to 48 USA continental states and Canada only. Travelling time is 3-8 business days.\u003c\/p\u003e \u003cp\u003eThe shipping weight is around 280Lb including packing and the pallet. The motor is 187 Lb. Two person lift is required for unloading if a forklift truck is unavailable.\u003c\/p\u003e","brand":"Tuhorse","offers":[{"title":"Default Title","offer_id":52023214932248,"sku":"TS845003T460","price":3508.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0978\/4492\/0600\/files\/8_inch_pump_end_and_6_inch_motor__91886.jpg?v=1782237711"},{"product_id":"30hp-ts8-450-03a-460v-3-phase-8-pump-end-and-6-oil-filled-motor-stainless-steel-impellers","title":"30HP TS8-450-03A 460V 3-Phase, 8\" Pump-end and 6\" Oil-Filled Motor, Stainless Steel Impellers","description":"\u003cp\u003eComplete nominal 8\" pump-end (wet-end) with 6\" motor bracket and 6\" oil-filled motor. This motor and pump can be installed either vertically or horizontally\u003c\/p\u003e \u003cp\u003eFit 8\" ID well casing, overall maximum diameter is 7 inches.  \u003c\/p\u003e \u003cp\u003eControl box (control panel) is not mandatory, but a three phase power switch with overload protection is required.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eHP: \u003c\/strong\u003e30HP\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eVoltage: \u003c\/strong\u003e460V Three Phase\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCycle: \u003c\/strong\u003e60 Hz\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eOperating Amperage: \u003c\/strong\u003e35.4A\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor RPM: \u003c\/strong\u003e3450 RPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eStages: \u003c\/strong\u003e3\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaximum Head (cut off): \u003c\/strong\u003e300 ft.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaximum Flow( 0-100 ft.): \u003c\/strong\u003e580 GPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eRated Flow:\u003c\/strong\u003e 450GPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cstrong\u003eFree \u003c\/strong\u003e\u003c\/strong\u003eFlow Rate: \u003c\/strong\u003e500GPM @ 175ft; 450GPM @ 195ft; 400GPM @ 202ft; 300GPM @ 238 ft; 200GPM @ 260ft.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSuction Port: \u003c\/strong\u003eCenter Suction S.S. 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDischarge Port: \u003c\/strong\u003e5 inch NPT Female S.S. 304 (5\" to 4\" NPT adapter \u003ca href=\"\/products\/5-npt-male-to-4-npt-female-adaptor-reducer-stainless-steel\"\u003esold separately\u003c\/a\u003e if needed)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBuilt-in Check-valve: \u003c\/strong\u003eYes, S.S. 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eHousing Material: \u003c\/strong\u003eStainless Steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eImpeller Material: \u003c\/strong\u003estainless steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Body and Top: \u003c\/strong\u003eStainless steel 304  \u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Base\u003c\/strong\u003e: Cast Iron\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDischarge and Suction Port Material: \u003c\/strong\u003e Stainless Steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Bearing \/ Lubrication:\u003c\/strong\u003e\u003cspan\u003e Ball bearing, Oil filled lubrication\u003c\/span\u003e\n\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDuty: \u003c\/strong\u003eContinuous or allow maximum 15 restarting cycles \/ hour\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eControl Box: \u003c\/strong\u003eThree phase power switch with overload protection is required(not included)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eNet Weight: \u003c\/strong\u003e215 Lbs.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 280 Lbs. (ship with LTL Freight only, see detail) \u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDimensions\/Length(pump and motor assembly): \u003c\/strong\u003e70\"\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003eMinimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector \/ Circuit breaker. The protector \/ breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do \u003cstrong\u003eNOT\u003c\/strong\u003e use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector \/ breaker or a protection device that does not cause phase loss (missing phase) problem.\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e* \u003c\/span\u003e\u003cspan\u003eNot exactly as shown in photos due to stage and HP vary from model. Photos was taken from one of the 20HP for illustrations only.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #0000ff; font-size: large; background-color: #ffffff;\"\u003eShipping information:\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003eDue to the weight is over the 150Lb limit set by regular courier services, this item will be delivered by LTL Freight service. Subject to surcharge if buyer is (1) in rural area, (2)without a forklift truck for unloading, (3) requires appointment, (4)Home delivery. Buyer can ask for delivering to your closest ABF or TForce Freight center for pick up to avoid the surcharges. \u003c\/p\u003e \u003cp\u003ePlease allow 2 days handling time. This item ship to 48 USA continental states and Canada only. Travelling time is 3-8 business days.\u003c\/p\u003e \u003cp\u003eThe shipping weight is around 280Lb including packing and the pallet. The motor is 187 Lb. Two person lift is required for unloading if a forklift truck is unavailable.\u003c\/p\u003e","brand":"Tuhorse","offers":[{"title":"Default Title","offer_id":52023221092632,"sku":"TS845003T460A","price":3408.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0978\/4492\/0600\/files\/TS845002T460A_Front_View_Website__37053.jpg?v=1777849799"},{"product_id":"20hp-ts8-450-02a-460v-3-phase-8-pump-end-and-6-oil-filled-motor-stainless-steel-impellers","title":"20HP TS8-450-02A 460V 3-Phase, 8\" Pump-end and 6\" Oil-Filled Motor, Stainless Steel Impellers","description":"\u003cp\u003eComplete nominal 8\" pump-end (wet-end) with 6\" motor bracket and 6\" oil-filled motor. This motor and pump can be installed either vertically or horizontally\u003c\/p\u003e \u003cp\u003eFit 8\" ID well casing, overall maximum diameter is 7 inches.  \u003c\/p\u003e \u003cp\u003eControl box (control panel) is not mandatory, but a three phase power switch with overload protection is required.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eHP: \u003c\/strong\u003e20HP\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eVoltage: \u003c\/strong\u003e460V Three Phase\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCycle: \u003c\/strong\u003e60 Hz\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eOperating Amperage: \u003c\/strong\u003e25A\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor RPM: \u003c\/strong\u003e3450 RPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eStages: \u003c\/strong\u003e2\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaximum Head (cut off): \u003c\/strong\u003e200 ft.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaximum Flow( 0-90 ft.): \u003c\/strong\u003e580 GPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eRated Flow:\u003c\/strong\u003e 450GPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cstrong\u003eFree \u003c\/strong\u003e\u003c\/strong\u003eFlow Rate: \u003c\/strong\u003e520GPM @ 105ft; 450GPM @ 125ft; 395GPM @ 138ft; 350GPM @ 145ft; 200GPM @ 170ft.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSuction Port: \u003c\/strong\u003eCenter Suction S.S. 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDischarge Port: \u003c\/strong\u003e5 inch NPT Female S.S. 304 (5\" to 4\" NPT adapter \u003ca href=\"\/products\/5-npt-male-to-4-npt-female-adaptor-reducer-stainless-steel\"\u003esold separately\u003c\/a\u003e if needed)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBuilt-in Check-valve: \u003c\/strong\u003eYes, S.S. 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eHousing Material: \u003c\/strong\u003eStainless Steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eImpeller Material: \u003c\/strong\u003estainless steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Body and Top: \u003c\/strong\u003eStainless steel 304  \u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Base\u003c\/strong\u003e: Cast Iron\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDischarge and Suction Port Material: \u003c\/strong\u003e Stainless Steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Bearing \/ Lubrication:\u003c\/strong\u003e\u003cspan\u003e Ball bearing, Oil filled lubrication\u003c\/span\u003e\n\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDuty: \u003c\/strong\u003eContinuous or allow maximum 15 restarting cycles \/ hour\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eControl Box: \u003c\/strong\u003eThree phase power switch with overload protection is required(not included)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eNet Weight: \u003c\/strong\u003e180 Lbs.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 190 (150+40) Lbs.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDimensions\/Length(pump and motor assembly): \u003c\/strong\u003e65\"\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003eMinimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector \/ Circuit breaker. The protector \/ breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do \u003cstrong\u003eNOT\u003c\/strong\u003e use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector \/ breaker or a protection device that does not cause phase loss (missing phase) problem.\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e* \u003c\/span\u003e\u003cspan\u003eNot exactly as shown in photos due to stage and HP vary from model. Photos are for illustrations only.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #0000ff; font-size: large; background-color: #ffffff;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Tuhorse","offers":[{"title":"Default Title","offer_id":52023221158168,"sku":"TS845002T460A","price":2488.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0978\/4492\/0600\/files\/TS845002T460A_Front_View_Website__74318.jpg?v=1777849802"},{"product_id":"20hp-ts8-450-02-460v-3-phase-8inch-pump-end-and-6inch-water-filled-lubricated-motor-full-stainless-steel-motor-and-impellers","title":"20HP TS8-450-02 460V 3-Phase, 8\" Pump-end and 6\" Water-filled\/lubricated Motor, Full Stainless Steel motor and Impellers","description":"\u003cp\u003eComplete nominal 8\" pump-end(wet-end) with 6\" motor bracket, and 6\" water-lubricated motor. User must fill up distilled water into the motor before running it(roughly 3 gallons).\u003cbr\u003eFit 8\" ID well casing, overall maximum diameter is 7 inches. This model uses water-lubricated motor is for vertical installation only.\u003c\/p\u003e\n\u003cp\u003eControl box (control panel) is not mandatory, but a three phase power switch with overload protection is required.\u003c\/p\u003e\n\u003cp\u003eThis full stainless steel, water lubrication pump and motor is recommended for community water system. It is also better for using in lite corrosive water.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHP: \u003c\/strong\u003e20HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 460V Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCycle: \u003c\/strong\u003e60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Amperage: \u003c\/strong\u003e26.2A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor RPM: \u003c\/strong\u003e3450 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStages:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Head (cut off):\u003c\/strong\u003e 200 ft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow( 0-90 ft.): \u003c\/strong\u003e580 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Flow: \u003c\/strong\u003e450GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree Flow Rate:\u003c\/strong\u003e 520GPM @ 105ft; 450GPM @ 125ft; 395GPM @ 138ft; 350GPM @ 145ft; 200GPM @ 170ft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction Port: \u003c\/strong\u003eCenter Suction, S.S. 304\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDischarge Port: \u003c\/strong\u003e5 inch NPT Female S.S. 304 (5\" to 4\" NPT adapter sold separately if needed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Check-valve: \u003c\/strong\u003eYes, S.S. 304\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material: \u003c\/strong\u003eStainless Steel 304\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller Material: \u003c\/strong\u003estainless steel 304\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Body and Top: \u003c\/strong\u003eStainless steel 304\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Base: \u003c\/strong\u003eStainless steel 304\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Bearing \/ Lubrication: \u003c\/strong\u003eWater lubricated thrust bearing, water filled lubrication(user must fill up distilled water into motor)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty:\u003c\/strong\u003e Continuous or allow maximum 15 restarting cycles \/ hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Box: \u003c\/strong\u003eThree phase power switch with overload protection is required(\u003ca href=\"\/products\/20hp-460v-3-phase-control-panel-with-manual-automatic-water-level-control\"\u003esold separately\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight: \u003c\/strong\u003e203 Lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight: \u003c\/strong\u003e228 Lbs.(163+40+25), ship with LTL Freight only, see detail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\/Length(pump and motor assembly):\u003c\/strong\u003e 65\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMinimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector \/ Circuit breaker. The protector \/ breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector \/ breaker or a protection device that does not cause phase loss (missing phase) problem.\u003c\/p\u003e\n\u003cp\u003e* Not exactly as shown in photos due to stage and HP vary from model. Photos was taken from one of the 8\" model for illustrations only.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff; font-size: large; background-color: #ffffff;\"\u003eShipping information:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDue to the weight of motor is over the 150Lb limit set by regular courier services, this item will be delivered by LTL Freight service. Subject to additional charge if buyer is (1) in rural area, (2)without a forklift truck for unloading, (3) requires appointment, (4)Home delivery. Buyer can ask for delivering to your closest ABF or TForce Freight center for pick up to avoid the surcharges. \u003c\/p\u003e\n\u003cp\u003ePlease allow 2 days handling time. This item ship to 48 USA continental states and Canada only. Travelling time is 3-10 business days.\u003c\/p\u003e\n\u003cp\u003eThe shipping weight is around 228Lb including packing and the pallet. The motor is 163 Lb. Two person lift is required for unloading if a forklift truck is unavailable.\u003c\/p\u003e","brand":"Tuhorse","offers":[{"title":"Default Title","offer_id":52433147953432,"sku":"TS845002T460","price":2588.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0978\/4492\/0600\/files\/8_inch_pump_end_and_6_inch_motor__87506.jpg?v=1784846440"},{"product_id":"20hp-ts8-450-02-230v-3-phase-8inch-pump-end-and-6inch-water-filled-lubricated-motor-full-stainless-steel-motor-and-impellers","title":"20HP TS8-450-02 230V 3-Phase, 8\" Pump-end and 6\" Water-filled\/lubricated Motor, Full Stainless Steel motor and Impellers","description":"\u003cp\u003eComplete nominal 8\" pump-end(wet-end) with 6\" motor bracket, and 6\" water-lubricated motor. User must fill up distilled water into the motor before running it(roughly 3 gallons).\u003cbr\u003eFit 8\" ID well casing, overall maximum diameter is 7 inches. This model uses water-lubricated motor is for vertical installation only.\u003c\/p\u003e\n\u003cp\u003eControl box (control panel) is not mandatory, but a three phase power switch with overload protection is required.\u003c\/p\u003e\n\u003cp\u003eThis full stainless steel, water lubrication pump and motor is recommended for community water system. It is also better for using in lite corrosive water.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHP: \u003c\/strong\u003e20HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage: \u003c\/strong\u003e230V Three Phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCycle: \u003c\/strong\u003e60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Amperage: \u003c\/strong\u003e57A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor RPM: \u003c\/strong\u003e3450 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStages: \u003c\/strong\u003e2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Head (cut off): \u003c\/strong\u003e200 ft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Flow (0-90 ft.): \u003c\/strong\u003e580 GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated Flow: \u003c\/strong\u003e450GPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree Flow Rate:\u003c\/strong\u003e 520GPM @ 105ft; 450GPM @ 125ft; 395GPM @ 138ft; 350GPM @ 145ft; 200GPM @ 170ft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction Port:\u003c\/strong\u003e Center Suction, S.S. 304\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDischarge Port:\u003c\/strong\u003e 5 inch NPT Female S.S. 304 (5\" to 4\" NPT adapter sold separately if needed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Check-valve: \u003c\/strong\u003eYes, S.S. 304\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material: \u003c\/strong\u003eStainless Steel 304\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpeller Material:\u003c\/strong\u003e stainless steel 304\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Body and Top: \u003c\/strong\u003eStainless steel 304\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Base: \u003c\/strong\u003eStainless steel 304\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor Bearing \/ Lubrication:\u003c\/strong\u003e Water lubricated thrust bearing, water filled lubrication(user must fill up distilled water into motor)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty:\u003c\/strong\u003e Continuous or allow maximum 15 restarting cycles \/ hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Box: \u003c\/strong\u003eThree phase power switch with overload protection is required(\u003ca href=\"\/products\/20hp-460v-3-phase-control-panel-with-manual-automatic-water-level-control\"\u003esold \u003cstrong\u003eseparately\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight: \u003c\/strong\u003e203 Lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight: \u003c\/strong\u003e228 Lbs.(163+40+25), ship with LTL Freight only, see detail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\/Length(pump and motor assembly): \u003c\/strong\u003e65\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMinimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector \/ Circuit breaker. The protector \/ breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector \/ breaker or a protection device that does not cause phase loss (missing phase) problem.\u003c\/p\u003e\n\u003cp\u003e* Not exactly as shown in photos due to stage and HP vary from model. Photos was taken from one of the 8\" model for illustrations only.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff; font-size: large; background-color: #ffffff;\"\u003eShipping information:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDue to the weight of motor is over the 150Lb limit set by regular courier services, this item will be delivered by LTL Freight service. Subject to additional charge if buyer is (1) in rural area, (2)without a forklift truck for unloading, (3) requires appointment, (4)Home delivery. Buyer can ask for delivering to your closest ABF or TForce Freight center for pick up to avoid the surcharges. \u003c\/p\u003e\n\u003cp\u003ePlease allow 2 days handling time. This item ship to 48 USA continental states and Canada only. Travelling time is 3-10 business days.\u003c\/p\u003e\n\u003cp\u003eThe shipping weight is around 228Lb including packing and the pallet. The motor is 163 Lb. Two person lift is required for unloading if a forklift truck is unavailable.\u003c\/p\u003e","brand":"Tuhorse","offers":[{"title":"Default Title","offer_id":52433147986200,"sku":"TS845002T230","price":2587.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0978\/4492\/0600\/files\/8_inch_pump_end_and_6_inch_motor__02857.jpg?v=1784846442"},{"product_id":"20hp-ts8-450-02a-230v-3-phase-8inch-pump-end-and-6inch-oil-filled-motor-stainless-steel-impellers","title":"20HP TS8-450-02A 230V 3-Phase, 8\" Pump-end and 6\" Oil-Filled Motor, Stainless Steel Impellers","description":"\u003cp\u003eComplete nominal 8\" pump-end (wet-end) with 6\" motor bracket and 6\" oil-filled motor. This motor and pump can be installed either vertically or horizontally\u003c\/p\u003e \u003cp\u003eFit 8\" ID well casing, overall maximum diameter is 7 inches.  \u003c\/p\u003e \u003cp\u003eControl box (control panel) is not mandatory, but a three phase power switch with overload protection is required.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eHP: \u003c\/strong\u003e20HP\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eVoltage: \u003c\/strong\u003e230V Three Phase\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCycle: \u003c\/strong\u003e60 Hz\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eOperating Amperage: \u003c\/strong\u003e57A\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor RPM: \u003c\/strong\u003e3450 RPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eStages: \u003c\/strong\u003e2\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaximum Head (cut off): \u003c\/strong\u003e200 ft.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaximum Flow( 0-90 ft.): \u003c\/strong\u003e580 GPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eRated Flow:\u003c\/strong\u003e 450GPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cstrong\u003eFree \u003c\/strong\u003e\u003c\/strong\u003eFlow Rate: \u003c\/strong\u003e520GPM @ 105ft; 450GPM @ 125ft; 395GPM @ 138ft; 350GPM @ 145ft; 200GPM @ 170ft.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSuction Port: \u003c\/strong\u003eCenter Suction S.S. 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDischarge Port: \u003c\/strong\u003e5 inch NPT Female S.S. 304 (5\" to 4\" NPT adapter \u003ca href=\"\/products\/5-npt-male-to-4-npt-female-adaptor-reducer-stainless-steel\"\u003esold separately\u003c\/a\u003e if needed)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBuilt-in Check-valve: \u003c\/strong\u003eYes, S.S. 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eHousing Material: \u003c\/strong\u003eStainless Steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eImpeller Material: \u003c\/strong\u003estainless steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Body and Top: \u003c\/strong\u003eStainless steel 304  \u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Base\u003c\/strong\u003e: Cast Iron\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDischarge and Suction Port Material: \u003c\/strong\u003e Stainless Steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Bearing \/ Lubrication:\u003c\/strong\u003e\u003cspan\u003e Ball bearing, Oil filled lubrication\u003c\/span\u003e\n\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDuty: \u003c\/strong\u003eContinuous or allow maximum 15 restarting cycles \/ hour\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eControl Box: \u003c\/strong\u003eThree phase power switch with overload protection is required(\u003ca href=\"\/products\/20hp-460v-3-phase-control-panel-with-manual-automatic-water-level-control\"\u003esold separately\u003c\/a\u003e)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eNet Weight: \u003c\/strong\u003e180 Lbs.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 190 (150+40) Lbs.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDimensions\/Length(pump and motor assembly): \u003c\/strong\u003e65\"\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003eMinimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector \/ Circuit breaker. The protector \/ breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do \u003cstrong\u003eNOT\u003c\/strong\u003e use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector \/ breaker or a protection device that does not cause phase loss (missing phase) problem.\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e* \u003c\/span\u003e\u003cspan\u003eNot exactly as shown in photos due to stage and HP vary from model. Photos are for illustrations only.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #0000ff; font-size: large; background-color: #ffffff;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Tuhorse","offers":[{"title":"Default Title","offer_id":52433148018968,"sku":"TS845002T230A","price":2487.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0978\/4492\/0600\/files\/TS845002T460A_Front_View_Website__79035.jpg?v=1784846443"}],"url":"https:\/\/www.tuhorse.us\/collections\/8-inch-deep-well-pumps.oembed","provider":"Tuhorse Pumps","version":"1.0","type":"link"}