{"title":"230V Three Phase 6in A Series Oil-Cooled","description":"\u003cp\u003eThe \u003cstrong data-end=\"131\" data-start=\"96\"\u003eA-Series submersible well pumps\u003c\/strong\u003e were developed in response to customer demand for a pump with a motor that can be installed horizontally or at an inclined angle. Many applications require the pump to operate in a horizontal or angled position in open water environments, such as lakes, large cisterns, or angled mine shafts.\u003c\/p\u003e\n\u003cp data-end=\"611\" data-start=\"426\"\u003eCompared to our \u003cstrong data-end=\"486\" data-start=\"442\"\u003eFull Stainless Steel water-cooled series\u003c\/strong\u003e, the A-Series uses the same stainless-steel impeller pump-end, but is paired with a motor that has a cast-iron base\/stand.\u003c\/p\u003e","products":[{"product_id":"6-inch-deep-well-pumps-10hp-ts6-150-05-230v-3-phase-pump-end-and-oil-filled-motor-stainless-steel-impellers","title":"10HP TS6-150-05 230V 3-Phase, Pump-end and Oil-Filled Motor, Stainless Steel Impellers","description":"\u003cp\u003e Complete pump end and motor set. Control box (control panel) is not mandatory, but a three phase power switch with overload protection is required.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eHP:\u003c\/strong\u003e 10HP\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eVoltage: \u003c\/strong\u003e230V Three Phase\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCycle: \u003c\/strong\u003e60 Hz\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eOperating Amperage: \u003c\/strong\u003e26.4A\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor RPM: \u003c\/strong\u003e3450 RPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eStages: \u003c\/strong\u003e5\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaximum Head (cut off):\u003c\/strong\u003e 330 ft.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eRated Flow:\u003c\/strong\u003e 130GPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaximum Flow( 0-100 ft.): \u003c\/strong\u003e220 GPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eFree Flow Rate: \u003c\/strong\u003e180GPM @ 160ft; 150GPM @ 205ft; 130GPM @ 250ft; 100GPM @ 276 ft; 70GPM @ 300ft.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSuction Port: \u003c\/strong\u003eCenter Suction\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDischarge Port: \u003c\/strong\u003e4 inch NPT Female\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBuilt-in Check-valve: \u003c\/strong\u003eYes\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eHousing Material: \u003c\/strong\u003eStainless Steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eImpeller Material: \u003c\/strong\u003estainless steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Enclosure: \u003c\/strong\u003eStainless steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDischarge and Suction Port Material: \u003c\/strong\u003e Stainless Steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Bearing \/ Lubrication:\u003c\/strong\u003e Ball\u003cspan\u003e bearing, Oil filled lubrication\u003c\/span\u003e\n\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDuty: \u003c\/strong\u003eContinuous or allow maximum 15 restarting cycles \/ hour\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eControl Box: \u003c\/strong\u003eThree phase power switch with overload protection is required(not included)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eNet Weight: \u003c\/strong\u003e122 lbs\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 130 Lbs\u003c\/li\u003e \u003cli\u003e\u003cstrong\u003eDimensions\/Length(pump and motor assembly): \u003c\/strong\u003e\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eShipping Dimensions: \u003c\/strong\u003eMotor and pump separately packed\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003eMinimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector \/ Circuit breaker. The protector \/ breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do \u003cstrong\u003eNOT\u003c\/strong\u003e use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector \/ breaker or a protection device that does not cause phase loss (missing phase) problem.\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e* \u003c\/span\u003e\u003cspan\u003eNot exactly as shown in photos due to stages and HP vary from models. Photos are taken from one of the 10HP for illustrations only.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #0000ff; font-size: large; background-color: #ffffff;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Tuhorse","offers":[{"title":"Default Title","offer_id":52023213981976,"sku":"TS615005T230A","price":1727.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0978\/4492\/0600\/files\/6in_SS_water_cool__04096.jpg?v=1777849480"},{"product_id":"20hp-ts6-150-10a-230v-3-phase-set-with-stainless-steel-pump-end-and-oil-cooled-motor","title":"20HP TS6-150-10A 230V 3-Phase Set with Stainless Steel Pump-end and Oil-Cooled Motor","description":"\u003cp\u003eComplete pump end and motor set. Control box (control panel) is not mandatory, but a three phase power switch with overload protection is required.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eHP:\u003c\/strong\u003e 20HP\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eVoltage: \u003c\/strong\u003e230V Three Phase\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCycle: \u003c\/strong\u003e60 Hz\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eOperating Amperage: \u003c\/strong\u003e48.7A\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor RPM: \u003c\/strong\u003e3450 RPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eStages: \u003c\/strong\u003e10\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaximum Head (cut off): \u003c\/strong\u003e650 ft.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eRated Flow:\u003c\/strong\u003e 150GPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaximum Flow( 0-200 ft.): \u003c\/strong\u003e220 GPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eFree Flow Rate: \u003c\/strong\u003e180GPM @ 320ft; 150GPM @ 430ft; 130GPM @ 490ft; 100GPM @ 550 ft; 70GPM @ 590ft.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSuction Port: \u003c\/strong\u003eCenter Suction\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDischarge Port: \u003c\/strong\u003e4 inch NPT Female (4\" to 3\" NPT adapter \u003ca href=\"\/products\/4-npt-male-to-3-npt-female-adaptor-reducer-stainless-steel\"\u003esold separately\u003c\/a\u003e if needed)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBuilt-in Check-valve: \u003c\/strong\u003eYes (Stainless Steel 304)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eHousing Material: \u003c\/strong\u003eStainless Steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eImpeller Material: \u003c\/strong\u003estainless steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Body and Top: \u003c\/strong\u003eStainless steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Base(bottom):\u003c\/strong\u003e Cast Iron\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDischarge and Suction Port Material: \u003c\/strong\u003e Stainless Steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Bearing \/ Lubrication:\u003c\/strong\u003e  Ball\u003cspan\u003e\u003cspan\u003e bearing, Oil filled lubrication\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDuty: \u003c\/strong\u003eContinuous or allow maximum 15 restarting cycles \/ hour\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eControl Box: \u003c\/strong\u003eA three-phase power switch with overload protection is required (not included).\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eNet Weight: \u003c\/strong\u003e200 lbs.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 50+150 Lbs.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDimensions\/Length(pump and motor assembly): \u003c\/strong\u003e80 inches\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eShipping Dimensions: \u003c\/strong\u003eMotor and pump separately packed.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003eMinimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector \/ Circuit breaker. The protector \/ breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do \u003cstrong\u003eNOT\u003c\/strong\u003e use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector \/ breaker or a protection device that does not cause phase loss (missing phase) problem.\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e* \u003c\/span\u003e\u003cspan\u003eNot exactly as shown in photos due to stages and HP vary from models. Photos are taken from one of the 10HP for illustrations only.\u003c\/span\u003e\u003c\/p\u003e \u003ch3\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eShipping information:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e \u003cp\u003ePlease allow 1 days handling time. This item ship to USA and Canada only.\u003c\/p\u003e \u003cp\u003eThe motor is 150 Lb. Two person lift is required for unloading if a forklift truck is unavailable. Please help the driver to unload the packages.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #0000ff; font-size: large; background-color: #ffffff;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Tuhorse","offers":[{"title":"Default Title","offer_id":52023220928792,"sku":"TS615010T230A","price":2527.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0978\/4492\/0600\/files\/6in_SS_water_cool__42429.jpg?v=1777849793"},{"product_id":"20hp-ts6-200-06a-230v-3-phase-set-with-stainless-steel-pump-end-and-oil-cooled-motor","title":"20HP TS6-200-06A 230V 3-Phase Set with Stainless Steel Pump-end and Oil-Cooled Motor","description":"\u003cp\u003eComplete pump end and motor set. Control box (control panel) is not mandatory, but a three phase power switch with overload protection is required.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eHP:\u003c\/strong\u003e 20HP\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eVoltage: \u003c\/strong\u003e460V Three Phase\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCycle: \u003c\/strong\u003e60 Hz\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eOperating Amperage: \u003c\/strong\u003e48.7A\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor RPM: \u003c\/strong\u003e3450 RPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eStages: \u003c\/strong\u003e6\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaximum Head (cut off): \u003c\/strong\u003e400 ft.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eRated Flow:\u003c\/strong\u003e 200GPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaximum Flow( 0-210 ft.): \u003c\/strong\u003e290 GPM\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eFree Flow Rate: \u003c\/strong\u003e240GPM @ 250ft; 200GPM @ 280ft; 180GPM @ 300ft; 150GPM @ 325 ft; 120GPM @ 345ft.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSuction Port: \u003c\/strong\u003eCenter Suction\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDischarge Port: \u003c\/strong\u003e4 inch NPT Female (4\" to 3\" NPT adapter \u003ca href=\"\/products\/4-npt-male-to-3-npt-female-adaptor-reducer-stainless-steel\"\u003esold separately\u003c\/a\u003e if needed)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBuilt-in Check-valve: \u003c\/strong\u003eYes\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eHousing Material: \u003c\/strong\u003eStainless Steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eImpeller Material: \u003c\/strong\u003estainless steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Body and Top: \u003c\/strong\u003eStainless steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Base:\u003c\/strong\u003e Cast Iron\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDischarge and Suction Port Material: \u003c\/strong\u003e Stainless Steel 304\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMotor Bearing \/ Lubrication:\u003c\/strong\u003e  Ball\u003cspan\u003e\u003cspan\u003e bearing, Oil filled lubrication\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDuty: \u003c\/strong\u003eContinuous or allow maximum 15 restarting cycles \/ hour\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eControl Box: \u003c\/strong\u003eA three-phase power switch with overload protection is required (not included).\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eNet Weight: \u003c\/strong\u003e180 lbs.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 41+150 Lbs.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDimensions\/Length(pump and motor assembly): \u003c\/strong\u003enot have measured\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eShipping Dimensions: \u003c\/strong\u003eMotor and pump separately packed.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003eMinimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector \/ Circuit breaker. The protector \/ breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do \u003cstrong\u003eNOT\u003c\/strong\u003e use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector \/ breaker or a protection device that does not cause phase loss (missing phase) problem.\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e* \u003c\/span\u003e\u003cspan\u003eNot exactly as shown in photos due to stages and HP vary from models. Photos are taken from one of the 10HP for illustrations only.\u003c\/span\u003e\u003c\/p\u003e \u003ch3\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eShipping information:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e \u003cp\u003ePlease allow 1 days handling time. This item ship to 48 USA continental states and Canada only.\u003c\/p\u003e \u003cp\u003eThe motor is 150 Lb. Two person lift is required for unloading if a forklift truck is unavailable. Please help the driver to unload the packages.\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"color: #0000ff; font-size: large; background-color: #ffffff;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Tuhorse","offers":[{"title":"Default Title","offer_id":52023220961560,"sku":"TS620006T230A","price":2458.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0978\/4492\/0600\/files\/6in_SS_water_cool__83174.jpg?v=1777849794"}],"url":"https:\/\/www.tuhorse.us\/collections\/6-inch-deep-well-pumps-230v-three-phase-a-series-oil-cooled.oembed","provider":"Tuhorse Pumps","version":"1.0","type":"link"}