Tuhorse's TH2C50-180 above-ground centrifugal water pumps provide excellent pressure and flow to suit a broad range sprinkler and watering needs.
Solid cast iron construction and 2-stage brass impellers powered by a 3HP motor makes the TH2C50-180 a versatile and powerful water pump.
I have been using this pump for a few weeks for powering my irrigation reel at about 24 gallons a minute at 50 psi. I'm pumping out of a small pond I fill from a irrigation pond. It is tough to to prime so I would setup a way to prime automatically using a valve and water hose. Make sure you use a foot valve on the suction end and clean the valve . Keep the footvalve screen a couple inches off the bottom to help prevent stopping up of the foot valve. I would recommend the pump for this task.
Great pump but a bit difficult to prime. Once primed it works great.