Tuhorse 4 Inch submersible well pump end replacement NEMA standard
Sale

3HP TH4-070-06 (Pump End Only)

Tuhorse
SKU:
TH407006e
US$399.00 US$219.00
(No reviews yet)
Weight:
15.00 LBS
Condition:
New
Current Stock:
Description

Pump end only. Requires appropriate horse power motor and corresponding control box( if necessary) for operation.

This Tuhorse Pump-End is Adaptable (compatible) to those major brand motors with same HP rating or larger, Such as Franklin Electric 4" 3HP Submersible Motor for Deep Well Pump. NEMA standard.

Note: This pump is low pressure, high flow. It is used for free flow or low TDH applications, such as low head pumping to a holding tank, a pond or a dripping irrigation system. It is not made for a domestic water system with a pressure tank.

 

  • HP: Requires 3HP
  • Voltage: N/A
  • Cycle: N/A
  • Operating Amperage: N/A
  • Motor RPM : Required 3450 RPM
  • Stages: 6
  • Maximum Flow: 95 GPM
  • Maximum Head: 160ft
  • Typical Flow: 90GPM @ 60ft; 80GPM @ 75ft; 70GPM @ 90 ft; 60GPM @ 105 ft; 40GPM @ 125ft
  • Suction Port: Center Suction
  • Discharge Port: 2 in
  • Built-in Check-valve: Yes
  • Housing Material: Stainless Steel
  • Impeller Material: Thermal Plastic
  • Motor Enclosure: n/a
  • Duty: n/a
  • Control Box: n/a
  • Weight: 15 lbs
  • Dimensions/Length: n/a
Warranty
1 Year