Loading... Please wait...

Our Newsletter


10HP TH6-DS-05 460V 3Ph. Pump-end and Motor

Retail Price:
$2,280.00
$1,369.00 (You save $911.00)
SKU:
th6ds05t460
Brand:
Condition:
New
Weight:
119.00 LBS
Shipping:
Calculated at checkout


Product Description

Complete pump end and motor set. Control box (control panel) is not mandatory, but a three phase power switch with overload protection is required. Complete Instructions.

 

  • HP: 10HP
  • Voltage: 460V Three Phase
  • Cycle: 60 Hz
  • Operating Amperage: 13.8 A
  • Motor RPM: 3450 RPM
  • Stages: 5
  • Maximum Flow: 132 GPM
  • Maximum Head: 354 ft
  • Typical Flow: 106GPM @ 193ft; 97GPM @ 246ft; 66GPM @ 301ft
  • Suction Port: Center Suction
  • Discharge Port: 2.5" NPT
  • Built-in Check-valve: Yes
  • Housing Material: Stainless Steel
  • Impeller Material: Thermal Plastic
  • Motor Enclosure: Stainless steel
  • Duty: Continuous or up to 30 restarting cycles / hour
  • Control Box: Three phase power switch with overload protection is required.
  • Weight: 110 lbs
  • Shipping weight: 119 lbs
  • Dimensions/Length: 49.75"

 

Minimum requirement for operating the motor is a non-fused 3-phase power switch and a 3-phase overload protector / Circuit breaker. The protector / breaker must be the type of those that shut off all 3-phase when one or more phase is overloaded. Do NOT use a fused switch that could burn out one of the phase. Do NOT use three individual 1-Phase breakers. You must use a real 3-phase protector / breaker or a protection device that does not cause missing phase problem.

Warranty Information

1 Year

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the 10HP TH6-DS-05 460V 3Ph. Pump-end and Motor to your wish list.

You Recently Viewed...