Loading... Please wait...

Our Newsletter


3" 1HP TH3-010-18 230V 1Ph. Complete Set incl motor, pump-end and control box

Retail Price:
US$559.00
US$389.00 (You save US$170.00)
SKU:
TH301018M230
Brand:
Condition:
New
Weight:
39.00 LBS
Shipping:
Calculated at checkout


Product Description

If you have a hard time pulling your old 4 inch pump out of the well because the 4" steel well casing is rusted or the PVC casing is melted, consider to use a 3" pump instead.

This pump is also an ideal replacement for your jet pump. Go green, tired of priming your jet pump? get rid of your jet pump and use this higher efficient submersible!

 

Model: TH3-010-18

  • Fit 3 inch and larger ID well
  • HP: 1HP
  • Voltage: 230V Single Phase
  • Cycle: 60 Hz
  • Operating Amperage: 5.5 A
  • Motor RPM: 3420 RPM
  • Stages: 18
  • Rated Flow: 10 GPM
  • Maximum Flow: 14 GPM
  • Maximum Head: 280 ft
  • Typical Flow: 13.2GPM @ 141ft; 10.6GPM @ 190ft; 7.9GPM @ 226ft; 5GPM @ 251ft
  • Suction Port: Center Suction
  • Discharge Port: 1 inch NPT
  • Built-in Check-valve: Yes, but an external check valve is required in water tight systems
  • Housing Material: Stainless Steel 304
  • Impeller Material: Thermal Plastic
  • Motor Enclosure: Stainless steel 304
  • Motor Lead: 4 wires (3 wire + 1 ground)
  • Duty: Continuous or up to 30 restarting cycles / hour
  • Control Box: Dual capacitor control box
  • Weight: 23 lbs
  • Shipping weight: 33lbs
  • Packaging: 44" x 10" x 8"
  • Dimensions/Length: 113cm long, 7.3 cm diameter (44.5" long, 2.87" diameter)

 

This TH3-010-18 is formerly our TH3-T-20. The pump curve remains the same because they are the same pump. We are in the process changing the model name to reflect the flow rate. 010 stands for 10GPM. The new model numbers help our customers to choose the right pump easier.

Warranty Information

1 Year

Other Details

formerly known as TH3-T-20:

Find Similar Products by Category

Write your own product review

Product Reviews

Showing reviews 1-10 of 19 | Next

  1. It takes a beating and keeps working. 5 Star Review

    Posted by on 25th Nov 2017

    I was happy to find a pump to fit down my 3 inch steel casing. I had to work to get this pump past a bad rusted spot in my casing. Thank goodness this pump has a metal casing and can take a beating. It went down 105 feet and is working awesome for over a month. Much faster and more water pressure than my old piston pump. Thank you for all the help with the express delivery to get the pump to me. My family is enjoying the water, especially the showers. I would buy this again without a question.


  2. Awesome 5 Star Review

    Posted by on 15th Feb 2017

    Great piece of hardware!!!


  3. good quality 5 Star Review

    Posted by on 12th Sep 2016

    worked great


  4. A real geyser machine! 5 Star Review

    Posted by on 26th Apr 2016

    Great initial customer service in that the appropriateness of the 3" pump was quickly confirmed via email. I dropped it down my old windmill casing, lit it up and hosed down my wife who didn't realize the water-moving ability of this unit. My only reservation re. this unit is that it was far too pretty to put down a well, beautiful piece of hardware.


  5. Great Customer Service 5 Star Review

    Posted by on 28th Dec 2015

    Our quit after 4 months of use ...I called customer service . The technician helped me test wiring to find that wiring may be the issue ...I pulled the pump sure enough wires were burned and shorted in well casing; replaced the wiring & pump fired right up . Thank You !! Not only did help us with the pump but followed up with us ON HIS SATURDAY DAY OFF !!! THANK You !
    This pump works Great far better than original .


  6. Looks good. 4 Star Review

    Posted by on 7th Oct 2015

    We don't have it in yet, but the pump looks good. We would like to know if there is any way we could sell or help your company sell your product in this area. Thank you!!


  7. Perfect pump for 4 inch casing 5 Star Review

    Posted by on 26th Aug 2015

    Pump works great I have it 40 ft and it operates 3 impact sprinklers that use 4 gpm each. And the people at tuhorse are very knowledgeable and friendly.


  8. Tuhorse 3" submersible, the BEST 5 Star Review

    Posted by on 4th Aug 2015

    My 3" submersible pump has been in service for 7 days now. It was very easy to assemble both pump and motor. It went down my 4" casing very very easy. Thanks to a well driller friend, he suggested I purchase a 3" pump rather than drill a new well. I saved thousands $$. When I read the reviews of this particular pump, that's when I decided to buy it, 4 and 5 star reviews and the cost was half of what others wanted. They answered all my questions promptly before purchasing. I am very satisfied, I recommend Tuhorse for all well pump needs.


  9. 3 inch dia pump 5 Star Review

    Posted by on 26th Jun 2015

    This 3 inch pump saved my customer the price of drilling a new well. The splice kit did not work. the shrink tubing is to big for the small wire from the pump. I used anchor epoxy filled shrink tubing. Service and support from the company is exellent.


  10. 3 inch pump and motor 5 Star Review

    Posted by on 2nd Mar 2015

    This is a small diameter pump 2 7/8 od This little pump works great for tight holes pumps great and in my well at 160 feet produce's 12 GPM.THANKS FOR A GREAT PRODUCT


Showing reviews 1-10 of 19 | Next

Currency Converter

Choose a currency below to display product prices in the selected currency.

United States Minor Outlying Islands US Dollar

Add to Wish List

Click the button below to add the 3" 1HP TH3-010-18 230V 1Ph. Complete Set incl motor, pump-end and control box to your wish list.

You Recently Viewed...