THC120-65 3HP 130GPM Max Centrifugal Pump for Drip, Aeroponic, and Open Flow Irrigation

2HP 120GPM Max Centrifugal Pump for General Water Transfer - Open Flow, Aeroponics Irrigation

Tuhorse
SKU:
THC12065
US$239.00
US$379.00
(You save US$140.00 )
(No reviews yet)
Weight:
53.00 LBS
Current Stock:
Adding to cart… The item has been added
Description

2HP Centrifugal Pump for General Pumping, Open Flow, Aeroponics Irrigation

 

Tuhorse THC120-65 centrifugal pump is a high flow rate water pump for moderate pressure and head applications. Offering a maximum flow rate of 120GPM,
the THC120-65 is excellent using in water moving, open flow pumping and where requires high flow such as filling water to a pond, suplying water to a aeroponics system.

Note: Do NOT use this pump for a sprinkler system that requires 30psi and higher pressure. Check out our Tuhorse TH2C47-160 pump that often to be used for a sprinkler system

 

  • Model: THC120-65
  • HP: 2HP
  • Voltage: 230V
  • Cycle: 60 Hz
  • Operating Amperage: 8.6A
  • Motor RPM: 3450 RPM
  • Stages: 1
  • Maximum Flow: 120 GPM
  • Maximum Head: 72 ft (30psi)
  • Maximum Suction: 22 ft
  • Typical Flow: 
  • Suction Port: 2 inch
  • Discharge Port: 2 inch
  • Built-in Check-valve: n/a
  • Housing Material: Cast Iron
  • Impeller Material: Brass
  • Motor Enclosure: TEFC (Totally Enclosed, Fan Cooled)
  • Duty: Continuous duty
  • Shipping Weight: 53 lbs
  • Dimensions/LxWxH: 14.5"x8"x10 1/4" (37cm x 20.3cm x 26cm)
  • Packing Dimensions: 16.5"x9.5"x11.5" (42cm x 24cm x 29cm)
 
Need even higher flow? Have a look at our 3HP THC130-80.